Added TUK FACK2SPM Cat5E RJ45 shielded panel mount coupler.

readme.md

@@ -523,6 +523,8 @@ Various electronic components used in hot ends and heated beds.
 | Function | Description |
 |:--- |:--- |
 | ```TO220_thickness()``` | Thickness of the tab of a TO220 |
+| ```fack2spm_bezel_size()``` | FACK2SPM Bezel dimensions |
+| ```fack2spm_screw()``` | Screw type for FACK2SPM |
 
 ### Modules
 | Module | Description |
@@ -531,6 +533,9 @@ Various electronic components used in hot ends and heated beds.
 | ```al_clad_resistor(type, value, leads = true)``` | Draw an aluminium clad resistor |
 | ```al_clad_resistor_hole_positions(type)``` | Position children at the screw holes of an aluminium clad resistor |
 | ```al_clad_resistor_holes(type, h = 100)``` | Drill screw holes for an aluminium clad resistor |
+| ```fack2spm()``` | Draw a FACK2SPM Cat5E RJ45 shielded panel mount coupler |
+| ```fack2spm_hole_positions()``` | Place children at the FACK2SPM mounting hole positions |
+| ```fack2spm_holes(h = 0)``` | Cut the holes for a FACK2SPM |
 | ```panel_USBA()``` | Draw a panel mount USBA connector |
 | ```panel_USBA_hole_positions()``` | Place children at hole positions |
 | ```panel_USBA_holes(h = 100)``` | Make holes for USBA connector |
@@ -555,6 +560,7 @@ Various electronic components used in hot ends and heated beds.
 |   4 | ```screw(M2p5_pan_screw, 16)``` |  Screw M2.5 pan x 16mm |
 |   4 | ```screw(M3_pan_screw, 16)``` |  Screw M3 pan x 16mm |
 |   1 | ```panel_USBA()``` |  Socket USB A panel mount |
+|   1 | ```tuk_fack2spm()``` |  TUK FACK2SPM Cat5E RJ45 shielded panel mount coupler |
 |   1 | ```thermal_cutout(TC)``` |  Thermal cutout TC |
 |   1 | ```resistor(Epcos)``` |  Thermistor Epcos B57560G104F 100K 1% |
 |   1 | ```resistor(EpcosBlue)``` |  Thermistor Epcos B57861S104F40 100K 1% |

tests/components.scad

@@ -41,9 +41,12 @@ module components() {
     translate([0, 50])
         TO220("Generic TO220 package");
 
-    translate([50, 50])
+    translate([40, 50])
         panel_USBA();
 
+    translate([80, 50])
+        fack2spm();
+
     translate([0,80])
         thermal_cutouts();
 

vitamins/component.scad

@@ -28,6 +28,7 @@ include <../core.scad>
 include <tubings.scad>
 include <spades.scad>
 use <../utils/rounded_cylinder.scad>
+use <../utils/dogbones.scad>
 
 function resistor_length(type)        = type[2]; //! Body length
 function resistor_diameter(type)      = type[3]; //! Body diameter
@@ -447,3 +448,75 @@ module thermal_cutout(type) { //! Draw specified thermal cutout
         thermal_cutout_hole_positions(type)
             children();
 }
+
+function fack2spm_bezel_size() = [19.2, 35.5, 2.6, 2]; //! FACK2SPM Bezel dimensions
+
+module fack2spm_hole_positions() //! Place children at the FACK2SPM mounting hole positions
+    for(end = [-1, 1])
+        translate([0, end * 28.96 / 2])
+            children();
+
+function fack2spm_screw() = M3_dome_screw; //! Screw type for FACK2SPM
+
+module fack2spm_holes(h = 0) { //! Cut the holes for a FACK2SPM
+    fack2spm_hole_positions()
+        drill(screw_clearance_radius(fack2spm_screw()), h);
+
+    dogbone_rectangle([17.15, 22.86, h]);
+}
+
+module fack2spm() { //! Draw a FACK2SPM Cat5E RJ45 shielded panel mount coupler
+    vitamin("tuk_fack2spm(): TUK FACK2SPM Cat5E RJ45 shielded panel mount coupler");
+
+    bezel = fack2spm_bezel_size();
+    body   = [16.8, 22.8, 9.8];
+    socket = [14.5, 16.1, 29.6];
+    y_offset = -(19.45 - 16.3) / 2;
+    plug = [12, 6.8, 10];
+    plug_y = y_offset - socket.y / 2 + 4 + plug.y / 2;
+    tab1 = [4, 3];
+    tab2 = [6.3, 1.6];
+
+    module socket()
+        translate([0, y_offset])
+            square([socket.x, socket.y], center = true);
+
+    color("silver") {
+        linear_extrude(bezel.z)
+            difference() {
+                rounded_square([bezel.x, bezel.y], bezel[3]);
+
+                fack2spm_hole_positions()
+                    circle(d = 3.15);
+
+                socket();
+            }
+
+        translate_z(bezel.z - body.z)
+            linear_extrude(body.z - eps)
+                difference() {
+                    square([body.x, body.y], center = true);
+
+                    socket();
+                }
+
+        translate_z(bezel.z - socket.z)
+            linear_extrude(socket.z - 0.1)
+                difference() {
+                    offset(-0.1) socket();
+
+                    translate([0, plug_y]) {
+                        square([plug.x, plug.y], center = true);
+
+                        translate([0, -plug.y / 2]) {
+                            square([tab1.x, 2 * tab1.y], center = true);
+
+                            square([tab2.x, 2 * tab2.y], center = true);
+                        }
+                    }
+                }
+
+        translate([0, plug_y, -socket.z / 2])
+            cube([plug.x, plug.y, socket.z - 2 * plug.z], center = true);
+    }
+}