diff --git a/.gitignore b/.gitignore
index d0bee55..9afdab2 100644
--- a/.gitignore
+++ b/.gitignore
@@ -6,3 +6,4 @@ tests/bom/
 tests/deps/
 *.log
 *.html
+times.txt
diff --git a/times.txt b/times.txt
deleted file mode 100644
index 313fdb2..0000000
--- a/times.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-{
-    "tests/annotation.scad": 2.104,
-    "tests/ball_bearings.scad": 2.148,
-    "tests/batteries.scad": 3.81,
-    "tests/belts.scad": 3.212,
-    "tests/bezier.scad": 5.746,
-    "tests/blowers.scad": 2.133,
-    "tests/box.scad": 14.312,
-    "tests/bulldogs.scad": 2.465,
-    "tests/buttons.scad": 2.261,
-    "tests/butt_box.scad": 8.325,
-    "tests/cable_grommets.scad": 2.128,
-    "tests/cable_strips.scad": 2.148,
-    "tests/carriers.scad": 2.259,
-    "tests/clip.scad": 5.751,
-    "tests/components.scad": 3.266,
-    "tests/corner_block.scad": 17.288,
-    "tests/displays.scad": 1.936,
-    "tests/dogbones.scad": 1.543,
-    "tests/door_hinge.scad": 1.622,
-    "tests/door_latch.scad": 3.21,
-    "tests/d_connectors.scad": 1.743,
-    "tests/fans.scad": 1.963,
-    "tests/fan_guard.scad": 1.861,
-    "tests/fillet.scad": 1.468,
-    "tests/fixing_block.scad": 4.495,
-    "tests/foot.scad": 1.54,
-    "tests/fuseholder.scad": 1.629,
-    "tests/global.scad": 1.445,
-    "tests/handle.scad": 2.211,
-    "tests/hanging_hole.scad": 2.239,
-    "tests/hot_ends.scad": 2.875,
-    "tests/iecs.scad": 1.608,
-    "tests/inserts.scad": 1.462,
-    "tests/jack.scad": 2.241,
-    "tests/layout.scad": 1.708,
-    "tests/leadnuts.scad": 1.534,
-    "tests/leds.scad": 1.514,
-    "tests/light_strips.scad": 1.678,
-    "tests/linear_bearings.scad": 1.578,
-    "tests/maths.scad": 2.017,
-    "tests/meter.scad": 2.135,
-    "tests/microswitches.scad": 1.77,
-    "tests/microview.scad": 2.88,
-    "tests/modules.scad": 2.25,
-    "tests/nuts.scad": 1.933,
-    "tests/offset.scad": 12.661,
-    "tests/opengrab.scad": 1.69,
-    "tests/o_ring.scad": 1.826,
-    "tests/pcbs.scad": 5.944,
-    "tests/pillars.scad": 1.908,
-    "tests/polyholes.scad": 3.002,
-    "tests/psus.scad": 6.242,
-    "tests/pulleys.scad": 5.971,
-    "tests/quadrant.scad": 2.113,
-    "tests/rails.scad": 2.865,
-    "tests/ribbon_clamp.scad": 5.174,
-    "tests/ring_terminals.scad": 2.097,
-    "tests/rockers.scad": 1.49,
-    "tests/rod.scad": 2.082,
-    "tests/round.scad": 352.238,
-    "tests/rounded_cylinder.scad": 2.155,
-    "tests/rounded_polygon.scad": 1.951,
-    "tests/rounded_rectangle.scad": 1.86,
-    "tests/screws.scad": 2.783,
-    "tests/screw_knob.scad": 4.461,
-    "tests/sealing_strip.scad": 1.709,
-    "tests/sector.scad": 2.029,
-    "tests/sheets.scad": 1.907,
-    "tests/socket_13A.scad": 9.275,
-    "tests/spades.scad": 2.28,
-    "tests/spheres.scad": 1.569,
-    "tests/spools.scad": 2.278,
-    "tests/springs.scad": 3.446,
-    "tests/ssrs.scad": 3.371,
-    "tests/stepper_motors.scad": 3.43,
-    "tests/strap_handle.scad": 3.182,
-    "tests/sweep.scad": 4.344,
-    "tests/teardrops.scad": 2.764,
-    "tests/toggles.scad": 3.929,
-    "tests/transformers.scad": 2.852,
-    "tests/tube.scad": 2.773,
-    "tests/tubings.scad": 3.01,
-    "tests/variacs.scad": 3.045,
-    "tests/veroboard.scad": 3.791,
-    "tests/washers.scad": 3.706,
-    "tests/zipties.scad": 2.501,
-    "tests/bom.scad": 2.328,
-    "tests/sphere.scad": 2.092,
-    "tests/socket_box.scad": 21.617,
-    "tests/mains_sockets.scad": 15.204
-}
\ No newline at end of file