Added M2 dome head screws.

readme.md

@@ -2922,6 +2922,7 @@ Machine screws and wood screws with various head styles.
 |   1 | ```screw(No632_pan_screw, 30)``` |  Screw 6-32 pan x 30mm |
 |   1 | ```screw(M2_cap_screw, 10)``` |  Screw M2 cap x 10mm |
 |   1 | ```screw(M2_cs_cap_screw, 10)``` |  Screw M2 cs cap x 10mm |
+|   1 | ```screw(M2_dome_screw, 10)``` |  Screw M2 dome x 10mm |
 |   1 | ```screw(M2p5_cap_screw, 10)``` |  Screw M2.5 cap x 10mm |
 |   1 | ```screw(M2p5_pan_screw, 10)``` |  Screw M2.5 pan x 10mm |
 |   1 | ```screw(M3_cap_screw, 10)``` |  Screw M3 cap x 10mm |

vitamins/screw.scad

@@ -175,12 +175,15 @@ module screw(type, length, hob_point = 0, nylon = false) { //! Draw specified sc
 
         if(head_type == hs_dome) {
             lift = 0.38;
+            h = head_height - lift;
+            r = min(2 * head_height, (sqr(head_rad) + sqr(h)) / 2 * h); // Special case for M2
+            y = sqrt(sqr(r) - sqr(head_rad));
             color(colour) {
                 rotate_extrude() {
                     difference() {
                         intersection() {
-                            translate([0, -head_height + lift])
-                                circle(2 * head_height);
+                            translate([0, -y + lift])
+                                circle(r);
 
                             square([head_rad, head_height]);
                         }

vitamins/screws.scad

@@ -75,10 +75,11 @@ M5_cap_screw     = ["M5_cap", "M5 cap",         hs_cap,   5, 8.5, 5,    2.5, 4.0
 M6_cap_screw     = ["M6_cap", "M6 cap",         hs_cap,   6, 10,  6,    3.3, 5.0, 24,  M6_washer, M6_nut,   M6_tap_radius,    M6_clearance_radius];
 M8_cap_screw     = ["M8_cap", "M8 cap",         hs_cap,   8, 13,  8,    4.3, 6.0, 28,  M8_washer, M8_nut,   M8_tap_radius,    M8_clearance_radius];
 
-M2_cs_cap_screw  = ["M2_cs_cap","M2 cs cap",    hs_cs_cap,2, 3.8, 0,    0.65,1.27,16,  M2_washer, M2_nut,   M2_tap_radius,    M2_clearance_radius];
+M2_cs_cap_screw  = ["M2_cs_cap","M2 cs cap",    hs_cs_cap,2, 3.8, 0,    0.65,1.3, 16,  M2_washer, M2_nut,   M2_tap_radius,    M2_clearance_radius];
 M3_cs_cap_screw  = ["M3_cs_cap","M3 cs cap",    hs_cs_cap,3, 6.0, 0,    1.05,2.0, 18,  M3_washer, M3_nut,   M3_tap_radius,    M3_clearance_radius];
 M4_cs_cap_screw  = ["M4_cs_cap","M4 cs cap",    hs_cs_cap,4, 8.0, 0,    1.49,2.5, 20,  M4_washer, M4_nut,   M4_tap_radius,    M4_clearance_radius];
 
+M2_dome_screw    = ["M2_dome", "M2 dome",       hs_dome,  2, 3.5, 1.3,  0.6, 1.3, 16,  M2_washer, M2_nut,   M2_tap_radius,    M2_clearance_radius];
 M3_dome_screw    = ["M3_dome", "M3 dome",       hs_dome,  3, 5.7, 1.65, 1.04,2.0, 18,  M3_washer, M3_nut,   M3_tap_radius,    M3_clearance_radius];
 M4_dome_screw    = ["M4_dome", "M4 dome",       hs_dome,  4, 7.6, 2.2,  1.3, 2.5, 20,  M4_washer, M4_nut,   M4_tap_radius,    M4_clearance_radius];
 
@@ -106,14 +107,14 @@ No6_screw        = ["No6", "No6 pan wood",      hs_pan, 3.5, 6.7, 2.2,    0,   0
 No6_cs_screw     = ["No6_cs", "No6 cs wood",    hs_cs,  3.5, 7.0, 0,      0,   0, 0,   M4_washer, false,    No6_pilot_radius, No6_clearance_radius];
 
 screw_lists = [
-[ M2_cap_screw, M2p5_cap_screw, M3_cap_screw, M4_cap_screw, M5_cap_screw, M6_cap_screw, M8_cap_screw],
+[ M2_cap_screw, M2p5_cap_screw, M3_cap_screw,    M4_cap_screw, M5_cap_screw, M6_cap_screw, M8_cap_screw],
 [ 0,            0,              M3_low_cap_screw],
-[ 0,            0,              M3_hex_screw, M4_hex_screw, M5_hex_screw, M6_hex_screw, M8_hex_screw],
-[ 0,            M2p5_pan_screw, M3_pan_screw, M4_pan_screw, M5_pan_screw, M6_pan_screw, No632_pan_screw],
-[ 0,            No2_screw,      No4_screw,    No6_screw,    No6_cs_screw],
+[ 0,            0,              M3_hex_screw,    M4_hex_screw, M5_hex_screw, M6_hex_screw, M8_hex_screw],
+[ 0,            M2p5_pan_screw, M3_pan_screw,    M4_pan_screw, M5_pan_screw, M6_pan_screw, No632_pan_screw],
+[ 0,            No2_screw,      No4_screw,       No6_screw,    No6_cs_screw],
 [ 0,            M2_cs_cap_screw,M3_cs_cap_screw, M4_cs_cap_screw],
-[ 0,            0,              M3_dome_screw, M4_dome_screw],
-[ 0,            0,              M3_grub_screw, M4_grub_screw]
+[ 0,            M2_dome_screw,  M3_dome_screw,   M4_dome_screw],
+[ 0,            0,              M3_grub_screw,   M4_grub_screw]
 ];
 
 use <screw.scad>