Added functions to create property lists that are created by the client.

Foot, box, bbox, pbox, flat_hinge and strap_handle.

printed/box.scad

@@ -52,6 +52,9 @@ function box_width(type)     = type[6]; //! Internal width
 function box_depth(type)     = type[7]; //! Internal depth
 function box_height(type)    = type[8]; //! Internal height
 
+function box(screw, wall, sheets, top_sheet, base_sheet, size, feet = false) = //! Construct a property list for a box.
+ concat([screw, wall, sheets, top_sheet, base_sheet, feet], size);
+
 function box_bezel_clearance(type) = bezel_clearance;
 
 function box_corner_gap(type) = 3; //! Gap between box_sheets at the corners to connect inside and outside profiles

printed/butt_box.scad

@@ -50,6 +50,9 @@ function bbox_name(type)       = type[8] ? type[8] : "bbox"; //! Optional name i
 function bbox_skip_blocks(type)= type[9] ? type[9] : [];  //! List of fixing blocks to skip, used to allow a hinged panel for example
 function star_washers(type)    = type[10] ? type[10] : is_undef(type[10]); //! Set to false to remove star washers.
 
+function bbox(screw, sheets, base_sheet, top_sheet, span, size, name = "bbox", skip_blocks = [], star_washers = true) = //! Construct the property list for a butt_box
+ [ screw, sheets, base_sheet, top_sheet, span, size.x, size.y, size.z, name, skip_blocks, star_washers ];
+
 function bbox_volume(type) = bbox_width(type) * bbox_depth(type) * bbox_height(type) / 1000000; //! Internal volume in litres
 function bbox_area(type) = let(w =  bbox_width(type), d = bbox_depth(type), h = bbox_height(type)) //! Internal surdface area in m^2
     2 * (w * d + w * h + d * h) / 1000000;

printed/flat_hinge.scad

@@ -42,6 +42,9 @@ function hinge_screws(type)      = type[8]; //! How many screws
 function hinge_clearance(type)   = type[9]; //! Clearance between knuckles
 function hinge_margin(type)      = type[10]; //! How far to keep the screws from the knuckes
 
+function flat_hinge(name, size, pin_d, knuckle_d, knuckles, screw, screws, clearance, margin) = //! Construct the property list for a flat hinge.
+ [name, size.x, size.y, size.z, pin_d, knuckle_d, knuckles, screw, screws, clearance, margin];
+
 function hinge_radius(type)      = washer_radius(screw_washer(hinge_screw(type))) + 1;
 
 module hinge_screw_positions(type) { //! Place children at the screw positions

printed/foot.scad

@@ -24,8 +24,10 @@
 include <../core.scad>
 use <../vitamins/insert.scad>
 
-foot        = [25, 12, 3, 2, M4_cap_screw, 10];
-insert_foot = [20, 10, 0, 2, M3_cap_screw, 10];
+function Foot(d, h, t, r, screw, slant = 10) = [d, h, t, r, screw, slant]; //! Construct a foot property list
+
+foot        = Foot(25, 12, 3, 2, M4_cap_screw);
+insert_foot = Foot(20, 10, 0, 2, M3_cap_screw);
 
 function insert_foot() = insert_foot; //! Default foot with insert
 

printed/printed_box.scad

@@ -30,6 +30,9 @@ include <../core.scad>
 use <../vitamins/insert.scad>
 use <foot.scad>
 
+function pbox(name, wall, top_t, base_t, radius, size, foot = false, screw = false, ridges = [0, 0]) //! Construct a printed box property list
+    = concat([name, wall, top_t, base_t, foot, screw, radius, ridges], size);
+
 function pbox_name(type)       = type[0]; //! Name to allow more than one box in a project
 function pbox_wall(type)       = type[1]; //! Wall thickness
 function pbox_top(type)        = type[2]; //! Top thickness

printed/strap_handle.scad

@@ -24,8 +24,7 @@
 include <../core.scad>
 use <../vitamins/insert.scad>
 
-strap = [18, 2, M3_pan_screw, 3, 25];
-function strap() = strap;
+strap = strap();
 
 wall = 2;
 clearance = 0.5;
@@ -40,6 +39,10 @@ function strap_screw(type = strap)     = type[2]; //! Screw type
 function strap_panel(type = strap)     = type[3]; //! Panel thickness
 function strap_extension(type = strap) = type[4]; //! How much length of the strap that can pull out
 
+
+function strap(width = 18, thickness = 2, screw = M3_pan_screw, panel_thickness = 3, extension = 25) = //! Construct a property list for a strap
+ [ width, thickness, screw, panel_thickness, extension ];
+
 function strap_insert(type) = screw_insert(strap_screw(type)); //! The insert type
 function strap_key(type) = strap_panel(type) - panel_clearance;
 function strap_height(type) = wall + max(insert_length(strap_insert(type)) - strap_key(type), strap_thickness(type) + clearance); //! Height of the ends

readme.md

@@ -3863,6 +3863,7 @@ Normally the side sheets are the same type but they can be overridden individual
 ### Functions
 | Function | Description |
 |:--- |:--- |
+| ```box(screw, wall, sheets, top_sheet, base_sheet, size, feet = false)``` | Construct a property list for a box. |
 | ```box_bezel_height(type, bottom)``` | Bezel height for top or bottom |
 | ```box_corner_gap(type)``` | Gap between box_sheets at the corners to connect inside and outside profiles |
 | ```box_inset(type)``` | How much the bezel intrudes on the specified width and length, away from the corners |
@@ -3974,6 +3975,7 @@ Uses [fixing blocks](#fixing_block) and [corner blocks](#corner_block).
 ### Functions
 | Function | Description |
 |:--- |:--- |
+| ```bbox(screw, sheets, base_sheet, top_sheet, span, size, name = "bbox", skip_blocks = [], star_washers = true)``` | Construct the property list for a butt_box |
 | ```bbox_area(type)``` | Internal surdface area in m^2 |
 | ```bbox_volume(type)``` | Internal volume in litres |
 
@@ -4441,6 +4443,11 @@ This allows the hinges and one set of screws to belong to one assembly and the o
 | ```hinge_thickness(type)``` | Thickness of the leaves |
 | ```hinge_width(type)``` | Width |
 
+### Functions
+| Function | Description |
+|:--- |:--- |
+| ```flat_hinge(name, size, pin_d, knuckle_d, knuckles, screw, screws, clearance, margin)``` | Construct the property list for a flat hinge. |
+
 ### Modules
 | Module | Description |
 |:--- |:--- |
@@ -4502,6 +4509,7 @@ inserts don't grip well in rubber.
 ### Functions
 | Function | Description |
 |:--- |:--- |
+| ```Foot(d, h, t, r, screw, slant = 10)``` | Construct a foot property list |
 | ```insert_foot()``` | Default foot with insert |
 
 ### Modules
@@ -4672,6 +4680,7 @@ It can also have printed feet on the base with the screws doubling up to hold th
 ### Functions
 | Function | Description |
 |:--- |:--- |
+| ```pbox(name, wall, top_t, base_t, radius, size, foot = false, screw = false, ridges = [0, 0])``` | Construct a printed box property list |
 | ```pbox_inclusion(type)``` | How far the ledge for the base extends inwards |
 | ```pbox_insert(type)``` | The insert for the base screws |
 | ```pbox_screw(type)``` | Foot screw if got feet else base_screw |
@@ -4999,6 +5008,7 @@ be fully customised by passing a list of properties.
 ### Functions
 | Function | Description |
 |:--- |:--- |
+| ```strap(width = 18, thickness = 2, screw = M3_pan_screw, panel_thickness = 3, extension = 25)``` | Construct a property list for a strap |
 | ```strap_end_width(type = strap)``` | Width of the ends |
 | ```strap_height(type)``` | Height of the ends |
 | ```strap_insert(type)``` | The insert type |

tests/box.scad

@@ -23,7 +23,7 @@ use <../vitamins/insert.scad>
 
 use <../printed/box.scad>
 
-box = [M3_dome_screw, 3, DiBond, PMMA3, DiBond6, true, 150, 100, 70];
+box = box(screw = M3_dome_screw, wall = 3, sheets = DiBond, top_sheet = PMMA3, base_sheet = DiBond6, feet = true, size = [150, 100, 70]);
 
 include <../printed/box_assembly.scad>
 

tests/butt_box.scad

@@ -25,7 +25,7 @@ include <../printed/butt_box.scad>
 
 $explode = 0;
 
-box = [M3_dome_screw, DiBond, DiBond6, PMMA3, 250, 400, 300, 120];
+box = bbox(screw = M3_dome_screw, sheets = DiBond, base_sheet = DiBond6, top_sheet = PMMA3, span = 250, size = [400, 300, 120]);
 
 module bbox_assembly() _bbox_assembly(box);
 

tests/flat_hinge.scad

@@ -32,8 +32,8 @@ clearance = 0.2;
 
 angle = 0; // [-90 : 180]
 
-big_hinge =   ["big",   width, depth, thickness, pin_diameter,  knuckle_diameter, knuckles, M3_dome_screw, screws, clearance, margin];
-small_hinge = ["small", 20,    16,    2,         2.85,          7,                3,        M3_dome_screw, 2,      0.2,       0];
+big_hinge =   flat_hinge(name = "big",  size = [width, depth, thickness], pin_d = pin_diameter, knuckle_d = knuckle_diameter, knuckles = knuckles, screw = M3_dome_screw, screws = screws, clearance = clearance, margin = margin);
+small_hinge = flat_hinge(name = "small", size =[ 20,    16,    2],        pin_d = 2.85,         knuckle_d = 7,                knuckles = 3,        screw = M3_dome_screw, screws = 2,      clearance = 0.2,       margin = 0);
 
 hinges = [small_hinge, big_hinge];
 

tests/printed_box.scad

@@ -21,25 +21,25 @@ include <../core.scad>
 use <../printed/foot.scad>
 use <../printed/printed_box.scad>
 
-foot = [13, 5, 2, 1, M3_pan_screw, 10];
+foot = Foot(d = 13, h = 5, t = 2, r = 1, screw = M3_pan_screw);
 module foot_stl() foot(foot);
 
 wall = 2;
 top_thickness = 2;
 base_thickness = 2;
-case_inner_rad = 8;
+inner_rad = 8;
 
 width = 80;
 depth = 45;
 height = 40;
 
-box1 = ["box1",  wall, top_thickness, base_thickness, false, M2_cap_screw, case_inner_rad, [8, 1], width,  depth, height];
-box2 = ["smooth_box", wall, top_thickness, base_thickness, foot,  false,        case_inner_rad, [0, 0], width,  depth, height];
+box1 = pbox(name = "box1",       wall = wall, top_t = top_thickness, base_t = base_thickness, radius = inner_rad, size = [width, depth, height], screw = M2_cap_screw, ridges = [8, 1]);
+box2 = pbox(name = "smooth_box", wall = wall, top_t = top_thickness, base_t = base_thickness, radius = inner_rad, size = [width, depth, height], foot = foot);
 
 module box1_feet_positions() {
     clearance = 2;
     foot_r = foot_diameter(foot) / 2;
-    x_inset = case_inner_rad + foot_r - pbox_ridges(box1).y;
+    x_inset = inner_rad + foot_r - pbox_ridges(box1).y;
     z_inset = foot_r + clearance;
     h = height + base_thickness;