Merge branch 'martinbudden-bl30x10'

readme.md

@@ -288,6 +288,8 @@ Models of radial blowers.
 | `blower_screw_holes(type)` | List of XY coordinates of the screw holes |
 | `blower_top(type)` | Thickness of the top |
 | `blower_wall(type)` | Side wall thickness |
+| `blower_wall_left(type)` | Left side wall thickness |
+| `blower_wall_right(type)` | Right wall thickness (for square fans) |
 | `blower_width(type)` | Width of enclosing rectangle |
 
 ### Functions
@@ -311,10 +313,12 @@ Models of radial blowers.
 |   1 | `blower(PE4020)` |  Blower Pengda Technology 4020 |
 |   1 | `blower(RB5015)` |  Blower Runda RB5015 |
 |   4 | `screw(M2_cap_screw, 8)` |  Screw M2 cap x  8mm |
+|   2 | `screw(M2_cap_screw, 10)` |  Screw M2 cap x 10mm |
 |   3 | `screw(M3_cap_screw, 20)` |  Screw M3 cap x 20mm |
 |   2 | `screw(M4_cap_screw, 25)` |  Screw M4 cap x 25mm |
+|   1 | `blower(BL30x10)` |  Square radial fan 3010 |
 |   1 | `blower(BL40x10)` |  Square radial fan 4010 |
-|   4 | `washer(M2_washer)` |  Washer  M2 x 5mm x 0.3mm |
+|   6 | `washer(M2_washer)` |  Washer  M2 x 5mm x 0.3mm |
 |   3 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |   2 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
 

tests/blowers.scad

@@ -22,7 +22,7 @@ use <../utils/layout.scad>
 include <../vitamins/blowers.scad>
 
 module blowers()
-    layout([for(b = blowers) blower_width(b)], 10, true) let(b = blowers[$i]){
+    layout([for(b = blowers) blower_width(b)], 5, true) let(b = blowers[$i]){
         screw = blower_screw(b);
         h = blower_lug(b);
 

vitamins/blower.scad

@@ -40,8 +40,10 @@ function blower_base(type)        = type[13]; //! Thickness of the base
 function blower_top(type)         = type[14]; //! Thickness of the top
 function blower_wall(type)        = type[15]; //! Side wall thickness
 function blower_lug(type)         = type[16]; //! Height of the lugs
+function blower_wall_left(type)   = type[15]; //! Left side wall thickness
+function blower_wall_right(type)  = type[17]; //! Right wall thickness (for square fans)
 
-function blower_casing_is_square(type) = len(blower_screw_holes(type)) > 3; //! True for square radial fans, false for spiral shape radial blowers
+function blower_casing_is_square(type) = blower_depth(type) < 15; //! True for square radial fans, false for spiral shape radial blowers
 function blower_exit_offset(type) = blower_casing_is_square(type) ? blower_length(type) / 2 : blower_exit(type) / 2; //! Offset of exit's centre from the edge
 
 fan_colour = grey(20);
@@ -74,41 +76,54 @@ module blower_fan(type, casing_is_square) {
 module blower_square(type) { //! Draw a square blower
     width = blower_width(type);
     depth = blower_depth(type);
-    wall = blower_wall(type);
+    wall_left = blower_wall_left(type);
+    wall_right = blower_wall_right(type);
+    hole_count = len(blower_screw_holes(type));
     hole_pitch = (blower_screw_holes(type)[1].x - blower_screw_holes(type)[0].x) / 2;
     corner_radius = width / 2 - hole_pitch;
-    corner_inset = (width - blower_exit(type)) / 2;
+    corner_inset = (width - blower_exit(type) - wall_left - wall_right) / (hole_count == 2 ? 1 : 2);
+
+    module inset_corners()
+        translate([width / 2, width / 2])
+            for(i = hole_count == 2 ? [1, 3] : [0 : 3])
+                rotate(i * 90)
+                    translate([-width / 2 - eps, -width/ 2 - eps])
+                        quadrant(corner_inset, corner_inset - corner_radius);
 
     module square_inset_corners(remove_center = false)
         difference() {
             //overall outside
-                square([width, width], center = false);
+            rounded_square([width, width], corner_radius, center = false);
 
             if (remove_center) {
                 // cut out the inside, leaving the corners
-                translate([corner_inset + wall, -eps])
+                translate([hole_count == 2 ? wall_left : corner_inset + wall_left, -eps])
-                    square([width - 2 * (wall + corner_inset), width - wall + eps], center = false);
+                    square([blower_exit(type), width / 2], center = false);
-
+                translate(blower_axis(type))
-                translate([wall, corner_inset + wall])
+                    circle(d = blower_bore(type) + 1);
-                    square([width - 2 * wall, width - 2 * (wall + corner_inset)], center = false);
             } else {
                 // cut out the bore for the fan
                 translate(blower_axis(type))
                     circle(d = blower_bore(type));
             }
-            // corner inset
+            inset_corners();
-            translate([width / 2, width / 2])
-            for(i = [0 : 3])
-                rotate(i * 90)
-                    translate([-width / 2 - eps, -width/ 2 - eps])
-                        quadrant(corner_inset, corner_inset - corner_radius);
         }
 
     base_height = blower_base(type);
     linear_extrude(base_height)
         difference () {
             rounded_square([width, width], corner_radius, center = false);
+            blower_hole_positions(type)
+                circle(d = blower_screw_hole(type));
+        }
 
+    // add the lugs which may be higher than the base
+    linear_extrude(blower_lug(type))
+        difference () {
+            intersection() {
+                rounded_square([width, width], corner_radius, center = false);
+                inset_corners();
+            }
             blower_hole_positions(type)
                 circle(d = blower_screw_hole(type));
         }

vitamins/blowers.scad

@@ -24,8 +24,9 @@
 //                                                   h                                                   h    s                                         t         t
 RB5015 = ["RB5015", "Blower Runda RB5015",           51.3, 51, 15, 31.5, M4_cap_screw, 26, [27.3, 25.4], 4.5, [[4.3, 45.4], [47.3,7.4]],     20,   14,  1.5, 1.3, 1.2, 15];
 PE4020 = ["PE4020", "Blower Pengda Technology 4020", 40,   40, 20, 27.5, M3_cap_screw, 22, [21.5, 20  ], 3.2, [[37,3],[3,37],[37,37]],       29.3, 17,  1.7, 1.2, 1.3, 13];
-BL40x10 =["BL40x10","Square radial fan 4010",        40,   40,9.5, 27,   M2_cap_screw, 16, [24,   20  ], 2.4, [[2,2],[38,2],[2,38],[38,38]], 30  , 9.5, 1.5, 1.5, 1.1, 1.5];
+BL30x10 =["BL30x10","Square radial fan 3010",        30,   30,10.1,25,   M2_cap_screw, 16, [16,   15  ], 2.4, [[3,27],[27,3]],               21.2, 9.5, 1.1, 1.2, 2.5, 2.8, 0.9];
+BL40x10 =["BL40x10","Square radial fan 4010",        40,   40,9.5, 27,   M2_cap_screw, 16, [24,   20  ], 2.4, [[2,2],[38,2],[2,38],[38,38]], 27.8, 9.5, 1.5, 1.5, 1.1, 1.5, 1.1];
 
-blowers = [BL40x10, PE4020, RB5015];
+blowers = [BL30x10, BL40x10, PE4020, RB5015];
 
 use <blower.scad>