Merge branch 'martinbudden-BTT_SKR_MINI_E3_V2_0'
This commit is contained in:
Chris Palmer
commit
5a1b06fbb9
BIN
libtest.png
BIN
libtest.png
Binary file not shown.
|
Before Width: | Height: | Size: 868 KiB After Width: | Height: | Size: 875 KiB |
15
readme.md
15
readme.md
|
|
@ -2305,6 +2305,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
|
|||
| ---:|:--- |:---|
|
||||
| 1 | `pcb(ArduinoLeonardo)` | Arduino Leonardo |
|
||||
| 1 | `pcb(ArduinoUno3)` | Arduino Uno R3 |
|
||||
| 1 | `pcb(BTT_SKR_MINI_E3_V2_0)` | BigTreeTech SKR Mini E3 v2.0 |
|
||||
| 1 | `pcb(BTT_SKR_V1_4_TURBO)` | BigTreeTech SKR v1.4 Turbo |
|
||||
| 1 | | Cat 5 patch cable 300mm |
|
||||
| 1 | `d_plug(DCONN15, pcb = true)` | D-type 15 way PCB mount plug |
|
||||
|
|
@ -2324,10 +2325,10 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
|
|||
| 1 | `molex_254(3)` | Molex KK header 3 way |
|
||||
| 16 | `nut(M2_nut, nyloc = true)` | Nut M2 x 1.6mm nyloc |
|
||||
| 34 | `nut(M2p5_nut, nyloc = true)` | Nut M2.5 x 2.2mm nyloc |
|
||||
| 16 | `nut(M3_nut, nyloc = true)` | Nut M3 x 2.4mm nyloc |
|
||||
| 17 | `nut(M3_nut, nyloc = true)` | Nut M3 x 2.4mm nyloc |
|
||||
| 8 | `nut(M4_nut, nyloc = true)` | Nut M4 x 3.2mm nyloc |
|
||||
| 1 | `pcb(PI_IO)` | PI_IO V2 |
|
||||
| 1 | `pcb(PSU12V1A)` | PSU 12V 1A |
|
||||
| 1 | `pcb(PSU12V1A)` | PSU 12V 1A - not shown |
|
||||
| 1 | `pcb(PERF60x40)` | Perfboard 60 x 40mm |
|
||||
| 1 | `pcb(PERF70x30)` | Perfboard 70 x 30mm |
|
||||
| 1 | `pcb(PERF70x50)` | Perfboard 70 x 50mm |
|
||||
|
|
@ -2346,8 +2347,8 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
|
|||
| 12 | `screw(M2p5_pan_screw, 25)` | Screw M2.5 pan x 25mm |
|
||||
| 4 | `screw(M2p5_pan_screw, 30)` | Screw M2.5 pan x 30mm |
|
||||
| 4 | `screw(M3_cap_screw, 16)` | Screw M3 cap x 16mm |
|
||||
| 8 | `screw(M3_cap_screw, 30)` | Screw M3 cap x 30mm |
|
||||
| 4 | `screw(M3_cap_screw, 35)` | Screw M3 cap x 35mm |
|
||||
| 4 | `screw(M3_cap_screw, 30)` | Screw M3 cap x 30mm |
|
||||
| 9 | `screw(M3_cap_screw, 35)` | Screw M3 cap x 35mm |
|
||||
| 8 | `screw(M4_cap_screw, 35)` | Screw M4 cap x 35mm |
|
||||
| 1 | `pcb(TP4056)` | TP4056 Li-lon Battery charger module |
|
||||
| 3 | `terminal_35(2)` | Terminal block 2 way 3.5mm |
|
||||
|
|
@ -2356,7 +2357,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
|
|||
| 1 | `pcb(WD2002SJ)` | WD2002SJ Buck Boost DC-DC converter |
|
||||
| 16 | `washer(M2_washer)` | Washer M2 x 5mm x 0.3mm |
|
||||
| 34 | `washer(M2p5_washer)` | Washer M2.5 x 5.9mm x 0.5mm |
|
||||
| 16 | `washer(M3_washer)` | Washer M3 x 7mm x 0.5mm |
|
||||
| 17 | `washer(M3_washer)` | Washer M3 x 7mm x 0.5mm |
|
||||
| 8 | `washer(M4_washer)` | Washer M4 x 9mm x 0.8mm |
|
||||
| 1 | `pcb(ZC_A0591)` | ZC-A0591 ULN2003 driver PCB |
|
||||
|
||||
|
|
@ -2373,11 +2374,11 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
|
|||
| 4 | pcb_spacer25150_2.stl |
|
||||
| 4 | pcb_spacer25160_2.stl |
|
||||
| 4 | pcb_spacer25170_2.stl |
|
||||
| 4 | pcb_spacer25190.stl |
|
||||
| 4 | pcb_spacer25200.stl |
|
||||
| 4 | pcb_spacer25210.stl |
|
||||
| 2 | pcb_spacer2580.stl |
|
||||
| 4 | pcb_spacer30180.stl |
|
||||
| 4 | pcb_spacer30190.stl |
|
||||
| 5 | pcb_spacer30210.stl |
|
||||
| 4 | pcb_spacer30220.stl |
|
||||
| 4 | pcb_spacer3050.stl |
|
||||
| 4 | pcb_spacer40230.stl |
|
||||
|
|
|
|||
Binary file not shown.
|
Before Width: | Height: | Size: 154 KiB After Width: | Height: | Size: 153 KiB |
|
|
@ -196,6 +196,105 @@ Duex5 = ["Duex5", "Duex5 expansion board",
|
|||
]),
|
||||
[]];
|
||||
|
||||
BTT_SKR_MINI_E3_V2_0 = [
|
||||
"BTT_SKR_MINI_E3_V2_0", "BigTreeTech SKR Mini E3 v2.0",
|
||||
100.75, 70.25, 1.6, // size
|
||||
1, // corner radius
|
||||
3, // mounting hole diameter
|
||||
5, // pad around mounting hole
|
||||
grey(30), // color
|
||||
false, // true if parts should be separate BOM items
|
||||
[ // hole positions
|
||||
[ 19.3, -2.89 ],
|
||||
[ 19.3 + 62.15, -2.89 ],
|
||||
[ 2.535, -2.89 - 34.98 ],
|
||||
[ 2.535 + 31.80, -2.89 - 37.63 ],
|
||||
[ 2.535 + 95.68, -2.89 - 64.47 ]
|
||||
],
|
||||
[ // components
|
||||
// cpu
|
||||
[ 55, 33, 0, "chip", 10, 10, 1, grey(15) ],
|
||||
// hotend and heated bed
|
||||
[ 26, 16, 0, "chip", 9.5, 8.5, 4, grey(15) ],
|
||||
[ 37, 14, 0, "chip", 6, 6, 2.5, grey(15) ],
|
||||
// driver chips
|
||||
[ 10.5,-17.5, 0, "chip", 5, 5, 1, grey(15) ],
|
||||
[ 30.5,-17.5, 0, "chip", 5, 5, 1, grey(15) ],
|
||||
[ 50.5,-17.5, 0, "chip", 5, 5, 1, grey(15) ],
|
||||
[ 70.5,-17.5, 0, "chip", 5, 5, 1, grey(15) ],
|
||||
// heat dissipation under board
|
||||
[ 43, -17.5, 0, "-block", 85, 8, 0.1, gold ],
|
||||
[ 40, 16, 0, "-block", 10, 8, 0.1, gold ],
|
||||
[ 27, 19, 0, "-block", 13,14, 0.1, gold ],
|
||||
[ 12, 28.5, 0, "-block", 11, 7, 0.1, gold ],
|
||||
// mock up heat sinks over the chips
|
||||
[ 10.5, -17.5, 0, "chip", 9, 8.5, 2, "DeepSkyBlue" ],
|
||||
for(x = [10.5], y = [-4,-2,0,2,4]) [ x, -17.5 + y, 0, "chip", 9, 0.75, 11, "DeepSkyBlue" ],
|
||||
[ 30.5, -17.5, 0, "chip", 9, 8.5, 2, "DeepSkyBlue" ],
|
||||
for(x = [30.5], y = [-4,-2,0,2,4]) [ x, -17.5 + y, 0, "chip", 9, 0.75, 11, "DeepSkyBlue" ],
|
||||
[ 50.5, -17.5, 0, "chip", 9, 8.5, 2, "DeepSkyBlue" ],
|
||||
for(x = [50.5], y = [-4,-2,0,2,4]) [ x, -17.5 + y, 0, "chip", 9, 0.75, 11, "DeepSkyBlue" ],
|
||||
[ 70.5, -17.5, 0, "chip", 9, 8.5, 2, "DeepSkyBlue" ],
|
||||
for(x = [70.5], y = [-4,-2,0,2,4]) [ x, -17.5 + y, 0, "chip", 9, 0.75, 11, "DeepSkyBlue" ],
|
||||
|
||||
// terminals
|
||||
[ 5.25, 5.3, 180, "gterm", gt_5x17, 2, undef, grey(20) ],
|
||||
[ 18.1, 5.1, -90, "gterm", gt_5x17, 2, undef, grey(20) ],
|
||||
[ 29.3, 5.1, -90, "gterm", gt_5x17, 2, undef, grey(20) ],
|
||||
[ 40.5, 5.1, -90, "gterm", gt_5x11, 2, undef, grey(20) ],
|
||||
// SD and USB
|
||||
[ -3, -(22.27 + 29.92)/2, 0, "usb_uA" ],
|
||||
[ -8, -( 2.13 + 17.17)/2, 0, "uSD", [17.17 - 2.13, 16, 2] ],
|
||||
// EXP
|
||||
[ -4.5, 17, -90, "2p54boxhdr", 5, 2 ],
|
||||
// TFT
|
||||
[ 66.1, 21.7, 0, "2p54header", 5, 1 ],
|
||||
// FAN0
|
||||
[ 50.25, 3.8, 0, "jst_xh", 2, false, grey(20) ],
|
||||
// FAN1
|
||||
[ 49.9, 16.1, 0, "jst_xh", 2, false, grey(20) ],
|
||||
// PS-ON
|
||||
[ 58.1, 16.1, 0, "jst_xh", 2, false, grey(20) ],
|
||||
// PWR-DET
|
||||
[ 67.5, 16.0, 0, "jst_xh", 3, false, grey(20) ],
|
||||
// E0-STOP
|
||||
[ 78.2, 16.0, 0, "jst_xh", 3, false, grey(20) ],
|
||||
// Z-PROBE
|
||||
[ 87.2, 20.5, -90,"jst_xh", 5, false, grey(20) ],
|
||||
// NEO Pixel
|
||||
[ 78.2, 27.1, 0, "jst_xh", 3, false, grey(20) ],
|
||||
// end stops
|
||||
[ 58.60, 3.8, 0, "jst_xh", 2, false, grey(20) ],
|
||||
[ 66.70, 3.8, 0, "jst_xh", 2, false, grey(20) ],
|
||||
[ 74.90, 3.8, 0, "jst_xh", 2, false, grey(20) ],
|
||||
// thermistors
|
||||
[ 83.00, 3.8, 0, "jst_xh", 2, false, grey(20) ],
|
||||
[ 91.10, 3.8, 0, "jst_xh", 2, false, grey(20) ],
|
||||
// motor connections
|
||||
[ 10.15, -4.2, 0, "jst_xh", 4, false, grey(20) ],
|
||||
[ 30.35, -4.2, 0, "jst_xh", 4, false, grey(20) ],
|
||||
[ 43.90, -4.2, 0, "jst_xh", 4, false, grey(20) ],
|
||||
[ 57.25, -4.2, 0, "jst_xh", 4, false, grey(20) ],
|
||||
[ 70.75, -4.2, 0, "jst_xh", 4, false, grey(20) ],
|
||||
// motor jumpers
|
||||
[ 20.6, 44.1, 0, "2p54header", 2, 1 ],
|
||||
[ 39.6, 44.2, 0, "2p54header", 2, 1 ],
|
||||
[ 60.1, 44.1, 0, "2p54header", 2, 1 ],
|
||||
[ 80.3, 44.1, 0, "2p54header", 2, 1 ],
|
||||
// SWD
|
||||
[ 43.9, 39.2, 0, "2p54header", 1, 5 ],
|
||||
// SPI
|
||||
[ -3.1, 31.9, 0, "2p54header", 2, 3 ],
|
||||
// PWR-1
|
||||
[ -12.8, 30.3, 0, "2p54header", 3, 1 ],
|
||||
// VOUT
|
||||
[ -14.0, 34.4, 0, "2p54header", 2, 2 ],
|
||||
// VIN
|
||||
[ 17.3, 19.6, 0, "2p54header", 2, 2 ],
|
||||
],
|
||||
[] // accessories
|
||||
];
|
||||
|
||||
TMC2130 = [
|
||||
"TMC2130", "TMC2130",
|
||||
20, 14, 1.6, // size
|
||||
|
|
@ -558,9 +657,9 @@ ESP_01 = [
|
|||
[] // accessories
|
||||
];
|
||||
|
||||
pcbs = [MP1584EN, TP4056, ESP_01, RAMPSEndstop, MT3608, PI_IO, ExtruderPCB, ZC_A0591, RPI0, EnviroPlus, ArduinoUno3, ArduinoLeonardo, Keyes5p1, PSU12V1A, WD2002SJ, RPI3, RPI4, BTT_SKR_V1_4_TURBO, DuetE, Duex5];
|
||||
pcbs = [MP1584EN, TP4056, ESP_01, RAMPSEndstop, MT3608, PI_IO, ExtruderPCB, ZC_A0591, RPI0, EnviroPlus, ArduinoUno3, ArduinoLeonardo, Keyes5p1, WD2002SJ, RPI3, RPI4, BTT_SKR_MINI_E3_V2_0, BTT_SKR_V1_4_TURBO, DuetE, Duex5];
|
||||
|
||||
pcbs_not_shown = [Melzi, Duex2];
|
||||
pcbs_not_shown = [Melzi, Duex2, PSU12V1A];
|
||||
|
||||
perfboards = [PERF74x51, PERF70x50, PERF60x40, PERF70x30, PERF80x20];
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue