mirror of
https://github.com/DJSundog/NopSCADlib.git
synced 2024-11-27 09:10:02 -05:00
Added axial PCB mounted resistors.
This commit is contained in:
Chris Palmer
parent
5afc4f816c
commit
4ef926a18f
BIN
libtest.png
BIN
libtest.png
Binary file not shown.
|
Before Width: | Height: | Size: 785 KiB After Width: | Height: | Size: 785 KiB |
95
readme.md
95
readme.md
@ -18,30 +18,75 @@ See [usage](docs/usage.md) for requirements, installation instructions and a usa
|
|||||||
## Table of Contents<a name="top"/>
|
## Table of Contents<a name="top"/>
|
||||||
<table><tr>
|
<table><tr>
|
||||||
<th align="left"> Vitamins A-I </th><th align="left"> Vitamins J-Q </th><th align="left"> Vitamins R-Z </th><th align="left"> Printed </th><th align="left"> Utilities </th><th align="left"> Core Utilities </th></tr>
|
<th align="left"> Vitamins A-I </th><th align="left"> Vitamins J-Q </th><th align="left"> Vitamins R-Z </th><th align="left"> Printed </th><th align="left"> Utilities </th><th align="left"> Core Utilities </th></tr>
|
||||||
<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#BOM">BOM</a> </td></tr>
|
<tr><td> <a href = "#Axials">Axials</a> </td><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#BOM">BOM</a> </td></tr>
|
||||||
<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#KP_pillow_blocks">KP_pillow_blocks</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
|
<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#KP_pillow_blocks">KP_pillow_blocks</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
|
||||||
<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#LDRs">LDRs</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Global">Global</a> </td></tr>
|
<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#LDRs">LDRs</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Global">Global</a> </td></tr>
|
||||||
<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
|
<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
|
||||||
<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SCS_bearing_blocks">SCS_bearing_blocks</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
|
<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SCS_bearing_blocks">SCS_bearing_blocks</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
|
||||||
<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Layout">Layout</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
|
<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Layout">Layout</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
|
||||||
<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Maths">Maths</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
|
<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Maths">Maths</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
|
||||||
<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
|
<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
|
||||||
<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Meter">Meter</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
|
<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Meter">Meter</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
|
||||||
<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
|
<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
|
||||||
<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
|
<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
|
||||||
<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
|
<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
|
||||||
<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
|
<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
|
||||||
<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
|
<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
|
||||||
<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
|
<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
|
||||||
<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
|
<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
|
||||||
<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
|
<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
|
||||||
<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
|
<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
|
||||||
<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
|
<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
|
||||||
<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Washers">Washers</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
|
<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Washers">Washers</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
|
||||||
<tr><td> <a href = "#IECs">IECs</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
|
<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
|
||||||
<tr><td> <a href = "#Inserts">Inserts</a> </td><td></td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
|
<tr><td> <a href = "#IECs">IECs</a> </td><td></td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
|
||||||
|
<tr><td> <a href = "#Inserts">Inserts</a> </td><td></td><td></td><td></td><td></td><td></td></tr>
|
||||||
</table>
|
</table>
|
||||||
|
|
||||||
|
---
|
||||||
|
<a name="Axials"></a>
|
||||||
|
## Axials
|
||||||
|
Axial components for PCBs.
|
||||||
|
|
||||||
|
|
||||||
|
[vitamins/axials.scad](vitamins/axials.scad) Object definitions.
|
||||||
|
|
||||||
|
[vitamins/axial.scad](vitamins/axial.scad) Implementation.
|
||||||
|
|
||||||
|
[tests/axials.scad](tests/axials.scad) Code for this example.
|
||||||
|
|
||||||
|
### Properties
|
||||||
|
| Function | Description |
|
||||||
|
|:--- |:--- |
|
||||||
|
| ```ax_res_colour(type)``` | Body colour |
|
||||||
|
| ```ax_res_diameter(type)``` | Body diameter |
|
||||||
|
| ```ax_res_end_d(type)``` | End cap diameter |
|
||||||
|
| ```ax_res_end_l(type)``` | End cap length |
|
||||||
|
| ```ax_res_length(type)``` | Body length |
|
||||||
|
| ```ax_res_wattage(type)``` | Power rating |
|
||||||
|
| ```ax_res_wire(type)``` | Wire diameter |
|
||||||
|
|
||||||
|
### Modules
|
||||||
|
| Module | Description |
|
||||||
|
|:--- |:--- |
|
||||||
|
| ```wire_link(d, l, h = 1)``` | Draw a wire jumper link. |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
### Vitamins
|
||||||
|
| Qty | Module call | BOM entry |
|
||||||
|
| ---:|:--- |:---|
|
||||||
|
| 1 | ```pcb(PERF60x40)``` | Perfboard 60 x 40mm |
|
||||||
|
| 1 | ```ax_res(res1_8, 1000)``` | Resistor 1000 Ohms 5% 0.125W |
|
||||||
|
| 1 | ```ax_res(res1_8, 2200, tol = 1)``` | Resistor 2200 Ohms 1% 0.125W |
|
||||||
|
| 1 | ```ax_res(res1_4, 39000, tol = 1)``` | Resistor 39000 Ohms 1% 0.25W |
|
||||||
|
| 1 | ```ax_res(res1_4, 47000)``` | Resistor 47000 Ohms 5% 0.25W |
|
||||||
|
| 1 | ```ax_res(res1_2, 8200)``` | Resistor 8200 Ohms 5% 0.5W |
|
||||||
|
| 1 | ```ax_res(res1_2, 8250, tol = 1)``` | Resistor 8250 Ohms 1% 0.5W |
|
||||||
|
|
||||||
|
|
||||||
|
<a href="#top">Top</a>
|
||||||
|
|
||||||
---
|
---
|
||||||
<a name="Ball_bearings"></a>
|
<a name="Ball_bearings"></a>
|
||||||
## Ball_bearings
|
## Ball_bearings
|
||||||
@ -2000,6 +2045,12 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
|
|||||||
| 1 | ```pin_socket(2p54header, 6, 1)``` | Pin socket 6 x 1 |
|
| 1 | ```pin_socket(2p54header, 6, 1)``` | Pin socket 6 x 1 |
|
||||||
| 1 | ```pin_socket(2p54header, 8, 1)``` | Pin socket 8 x 1 |
|
| 1 | ```pin_socket(2p54header, 8, 1)``` | Pin socket 8 x 1 |
|
||||||
| 1 | ```pin_socket(2p54header, 8, 1, right_angle = undef, height = undef, smt = undef)``` | Pin socket 8 x 1 |
|
| 1 | ```pin_socket(2p54header, 8, 1, right_angle = undef, height = undef, smt = undef)``` | Pin socket 8 x 1 |
|
||||||
|
| 1 | ```ax_res(res1_2, 10, tol = 10)``` | Resistor 10 Ohms 10% 0.5W |
|
||||||
|
| 1 | ```ax_res(res1_4, 100, tol = 2)``` | Resistor 100 Ohms 2% 0.25W |
|
||||||
|
| 1 | ```ax_res(res1_8, 1000)``` | Resistor 1000 Ohms 5% 0.125W |
|
||||||
|
| 1 | ```ax_res(res1_4, 10000)``` | Resistor 10000 Ohms 5% 0.25W |
|
||||||
|
| 1 | ```ax_res(res1_2, 100000)``` | Resistor 100000 Ohms 5% 0.5W |
|
||||||
|
| 1 | ```ax_res(res1_8, 1e+6, tol = 1)``` | Resistor 1e+6 Ohms 1% 0.125W |
|
||||||
| 1 | ```square_button(button_6mm)``` | Square button 6mm |
|
| 1 | ```square_button(button_6mm)``` | Square button 6mm |
|
||||||
| 1 | ```pcb(TMC2130)``` | TMC2130 |
|
| 1 | ```pcb(TMC2130)``` | TMC2130 |
|
||||||
| 1 | ```green_terminal(gt_5p08, 2)``` | Terminal block 2 way 0.2" |
|
| 1 | ```green_terminal(gt_5p08, 2)``` | Terminal block 2 way 0.2" |
|
||||||
|
|||||||
@ -17,9 +17,7 @@
|
|||||||
// If not, see <https://www.gnu.org/licenses/>.
|
// If not, see <https://www.gnu.org/licenses/>.
|
||||||
//
|
//
|
||||||
include <../core.scad>
|
include <../core.scad>
|
||||||
include <../vitamins/dip.scad>
|
use <../vitamins/dip.scad>
|
||||||
|
|
||||||
use <../utils/layout.scad>
|
|
||||||
|
|
||||||
dips = [[6, "OPTO"], [8, "NE555"], [14, "74HC00"], [16, "ULN2003"], [18, "ULN2803"], [20, "74HC245"], [28, "ATMEGA328"]];
|
dips = [[6, "OPTO"], [8, "NE555"], [14, "74HC00"], [16, "ULN2003"], [18, "ULN2803"], [20, "74HC245"], [28, "ATMEGA328"]];
|
||||||
|
|
||||||
|
|||||||
@ -20,6 +20,7 @@ include <../core.scad>
|
|||||||
include <../vitamins/microswitches.scad>
|
include <../vitamins/microswitches.scad>
|
||||||
include <../vitamins/d_connectors.scad>
|
include <../vitamins/d_connectors.scad>
|
||||||
include <../vitamins/leds.scad>
|
include <../vitamins/leds.scad>
|
||||||
|
include <../vitamins/axials.scad>
|
||||||
|
|
||||||
use <../vitamins/pcb.scad>
|
use <../vitamins/pcb.scad>
|
||||||
|
|
||||||
@ -79,6 +80,13 @@ test_pcb = ["TestPCB", "Test PCB",
|
|||||||
[ 5, 218, 180, "hdmi"],
|
[ 5, 218, 180, "hdmi"],
|
||||||
[ 3, 235, 180, "mini_hdmi"],
|
[ 3, 235, 180, "mini_hdmi"],
|
||||||
[ 6, 175, 180, "uSD", [12, 11.5, 1.4]],
|
[ 6, 175, 180, "uSD", [12, 11.5, 1.4]],
|
||||||
|
[ 65, 12, 0, "ax_res", res1_8, 1000],
|
||||||
|
[ 65, 17, 0, "ax_res", res1_4, 10000],
|
||||||
|
[ 65, 22, 0, "ax_res", res1_2, 100000],
|
||||||
|
|
||||||
|
[ 80, 12, 0, "ax_res", res1_8, 1000000, 1, inch(0.1)],
|
||||||
|
[ 80, 17, 0, "ax_res", res1_4, 100, 2, inch(0.1)],
|
||||||
|
[ 80, 22, 0, "ax_res", res1_2, 10, 10, inch(0.2)],
|
||||||
|
|
||||||
[ 60, 3, 0, "flex"],
|
[ 60, 3, 0, "flex"],
|
||||||
[ 50, 15, 0, "flat_flex"],
|
[ 50, 15, 0, "flat_flex"],
|
||||||
|
|||||||
43
tests/axials.scad
Normal file
43
tests/axials.scad
Normal file
@ -0,0 +1,43 @@
|
|||||||
|
//
|
||||||
|
// NopSCADlib Copyright Chris Palmer 2020
|
||||||
|
// nop.head@gmail.com
|
||||||
|
// hydraraptor.blogspot.com
|
||||||
|
//
|
||||||
|
// This file is part of NopSCADlib.
|
||||||
|
//
|
||||||
|
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
|
||||||
|
// GNU General Public License as published by the Free Software Foundation, either version 3 of
|
||||||
|
// the License, or (at your option) any later version.
|
||||||
|
//
|
||||||
|
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
||||||
|
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||||
|
// See the GNU General Public License for more details.
|
||||||
|
//
|
||||||
|
// You should have received a copy of the GNU General Public License along with NopSCADlib.
|
||||||
|
// If not, see <https://www.gnu.org/licenses/>.
|
||||||
|
//
|
||||||
|
include <../core.scad>
|
||||||
|
include <../vitamins/pcbs.scad>
|
||||||
|
|
||||||
|
|
||||||
|
module axials() {
|
||||||
|
pcb = PERF60x40;
|
||||||
|
pcb(pcb);
|
||||||
|
|
||||||
|
pcb_grid(pcb, 0, 2)
|
||||||
|
rotate(90)
|
||||||
|
wire_link(0.8, inch(0.4));
|
||||||
|
|
||||||
|
for(i = [0 : len(ax_resistors) - 1]) {
|
||||||
|
pcb_grid(pcb, 2 * i + 1, 1 + [0, 0.5, 1.5][i])
|
||||||
|
rotate(90)
|
||||||
|
ax_res(ax_resistors[i], [1000, 47000, 8200][i], 5);
|
||||||
|
|
||||||
|
pcb_grid(pcb, 2 * i + 1, 6.5)
|
||||||
|
rotate(-90)
|
||||||
|
ax_res(ax_resistors[i], [2200, 39000, 8250][i], 1, inch(0.1));
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if($preview)
|
||||||
|
axials();
|
||||||
BIN
tests/png/axial.png
Normal file
BIN
tests/png/axial.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 251 KiB |
BIN
tests/png/axials.png
Normal file
BIN
tests/png/axials.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 283 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 156 KiB After Width: | Height: | Size: 164 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 160 KiB After Width: | Height: | Size: 161 KiB |
139
vitamins/axial.scad
Normal file
139
vitamins/axial.scad
Normal file
@ -0,0 +1,139 @@
|
|||||||
|
//
|
||||||
|
// NopSCADlib Copyright Chris Palmer 2020
|
||||||
|
// nop.head@gmail.com
|
||||||
|
// hydraraptor.blogspot.com
|
||||||
|
//
|
||||||
|
// This file is part of NopSCADlib.
|
||||||
|
//
|
||||||
|
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
|
||||||
|
// GNU General Public License as published by the Free Software Foundation, either version 3 of
|
||||||
|
// the License, or (at your option) any later version.
|
||||||
|
//
|
||||||
|
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
||||||
|
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||||
|
// See the GNU General Public License for more details.
|
||||||
|
//
|
||||||
|
// You should have received a copy of the GNU General Public License along with NopSCADlib.
|
||||||
|
// If not, see <https://www.gnu.org/licenses/>.
|
||||||
|
//
|
||||||
|
|
||||||
|
//
|
||||||
|
//! Axial components for PCBs.
|
||||||
|
//
|
||||||
|
include <../utils/core/core.scad>
|
||||||
|
include <../utils/round.scad>
|
||||||
|
|
||||||
|
module wire_link(d, l, h = 1) { //! Draw a wire jumper link.
|
||||||
|
r = d;
|
||||||
|
tail = 3;
|
||||||
|
$fn = 32;
|
||||||
|
|
||||||
|
color("silver") {
|
||||||
|
for(side = [-1, 1]) {
|
||||||
|
translate([side * l / 2, 0, -tail])
|
||||||
|
cylinder(d = d, h = tail + h - r);
|
||||||
|
|
||||||
|
translate([side * (l / 2 - r), 0, h - r])
|
||||||
|
rotate([90, 0, side * 90 - 90])
|
||||||
|
rotate_extrude(angle = 90)
|
||||||
|
translate([r, 0])
|
||||||
|
circle(d = d);
|
||||||
|
}
|
||||||
|
|
||||||
|
translate_z(h)
|
||||||
|
rotate([0, 90, 0])
|
||||||
|
cylinder(d = d, h = l - 2 * r, center = true);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
function ax_res_wattage(type) = type[1]; //! Power rating
|
||||||
|
function ax_res_length(type) = type[2]; //! Body length
|
||||||
|
function ax_res_diameter(type)= type[3]; //! Body diameter
|
||||||
|
function ax_res_end_d(type) = type[4]; //! End cap diameter
|
||||||
|
function ax_res_end_l(type) = type[5]; //! End cap length
|
||||||
|
function ax_res_wire(type) = type[6]; //! Wire diameter
|
||||||
|
function ax_res_colour(type) = type[7]; //! Body colour
|
||||||
|
|
||||||
|
module orient_axial(length, height, pitch, wire_d) {
|
||||||
|
min_pitch = ceil((length + 1) / inch(0.1)) * inch(0.1);
|
||||||
|
lead_pitch = pitch ? pitch : min_pitch;
|
||||||
|
if(lead_pitch >= min_pitch) {
|
||||||
|
wire_link(wire_d, lead_pitch, height);
|
||||||
|
translate_z(height)
|
||||||
|
rotate([0, 90, 0])
|
||||||
|
children();
|
||||||
|
}
|
||||||
|
else {
|
||||||
|
wire_link(wire_d, lead_pitch, length + 0.7 + wire_d);
|
||||||
|
|
||||||
|
translate([-pitch / 2, 0, length / 2 + 0.2])
|
||||||
|
children();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
module ax_res(type, value, tol = 5, pitch = 0) {
|
||||||
|
vitamin(str("ax_res(", type[0], ", ", value, arg(tol, 5, "tol"), "): Resistor ", value, " Ohms ", tol, "% ",ax_res_wattage(type), "W"));
|
||||||
|
|
||||||
|
wire_d = ax_res_wire(type);
|
||||||
|
end_d = ax_res_end_d(type);
|
||||||
|
end_l = ax_res_end_l(type);
|
||||||
|
body_d = ax_res_diameter(type);
|
||||||
|
length = ax_res_length(type);
|
||||||
|
h = end_d / 2;
|
||||||
|
$fn = 32;
|
||||||
|
r = 0.3;
|
||||||
|
|
||||||
|
colours = ["gold", "silver", "black", "brown", "red", "orange", "yellow", "green", "blue", "violet", "grey", "white"];
|
||||||
|
|
||||||
|
exp = floor(log(value) + eps);
|
||||||
|
mult = exp - (len(str(value / pow(10, exp - 1))) > 2 ? 2 : 1);
|
||||||
|
digits = str(value / pow(10, mult));
|
||||||
|
bands = [
|
||||||
|
for(d = digits)
|
||||||
|
colours[ord(d) - ord("0") + 2],
|
||||||
|
colours[mult + 2],
|
||||||
|
tol == 1 ? "brown" :
|
||||||
|
tol == 2 ? "red" :
|
||||||
|
tol == 5 ? "gold" :
|
||||||
|
tol == 10 ? "silver" : "error"
|
||||||
|
];
|
||||||
|
|
||||||
|
module profile(o = 0)
|
||||||
|
intersection() {
|
||||||
|
offset(o) round(r)
|
||||||
|
union(){
|
||||||
|
translate([0, -length / 2])
|
||||||
|
square([body_d / 2, length]);
|
||||||
|
|
||||||
|
for(end = [-1, 1])
|
||||||
|
hull() {
|
||||||
|
translate([0, end * (length - end_l) / 2 - end_l / 2])
|
||||||
|
square([end_d / 2, end_l]);
|
||||||
|
|
||||||
|
translate([0, end * length / 2])
|
||||||
|
square([wire_d, 2 * r], center = true);
|
||||||
|
}
|
||||||
|
translate([-5, 0])
|
||||||
|
square([10 + wire_d, length + 4 * r], center = true);
|
||||||
|
}
|
||||||
|
|
||||||
|
translate([0, -50])
|
||||||
|
square([50, 100]);
|
||||||
|
}
|
||||||
|
|
||||||
|
orient_axial(length, h, pitch, wire_d) {
|
||||||
|
color(ax_res_colour(type))
|
||||||
|
rotate_extrude()
|
||||||
|
profile();
|
||||||
|
|
||||||
|
for(i = [0 : len(bands) - 1])
|
||||||
|
color(bands[i])
|
||||||
|
rotate_extrude()
|
||||||
|
intersection() {
|
||||||
|
profile(eps);
|
||||||
|
|
||||||
|
translate([0, length / 2 - end_l / 2 - i * (length - end_l) / (len(bands) - 1)])
|
||||||
|
square([end_d + 1, (length - end_l) / len(bands) / 2], center = true);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
30
vitamins/axials.scad
Normal file
30
vitamins/axials.scad
Normal file
@ -0,0 +1,30 @@
|
|||||||
|
//
|
||||||
|
// NopSCADlib Copyright Chris Palmer 2020
|
||||||
|
// nop.head@gmail.com
|
||||||
|
// hydraraptor.blogspot.com
|
||||||
|
//
|
||||||
|
// This file is part of NopSCADlib.
|
||||||
|
//
|
||||||
|
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
|
||||||
|
// GNU General Public License as published by the Free Software Foundation, either version 3 of
|
||||||
|
// the License, or (at your option) any later version.
|
||||||
|
//
|
||||||
|
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
||||||
|
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||||
|
// See the GNU General Public License for more details.
|
||||||
|
//
|
||||||
|
// You should have received a copy of the GNU General Public License along with NopSCADlib.
|
||||||
|
// If not, see <https://www.gnu.org/licenses/>.
|
||||||
|
//
|
||||||
|
|
||||||
|
//
|
||||||
|
//! Axial components
|
||||||
|
//
|
||||||
|
|
||||||
|
res1_8 = ["res1_8", 0.125, 3.3, 1.35, 1.7, 1, 0.33, "#FAE3AC"];
|
||||||
|
res1_4 = ["res1_4", 0.25, 5.7, 1.85, 2.3, 1.5, 0.55, "#FAE3AC"];
|
||||||
|
res1_2 = ["res1_2", 0.5, 10, 3.25, 3.7, 1.8, 0.70, "#FAE3AC"];
|
||||||
|
|
||||||
|
ax_resistors = [res1_8, res1_4, res1_2];
|
||||||
|
|
||||||
|
use <axial.scad>
|
||||||
@ -35,6 +35,7 @@ use <../utils/tube.scad>
|
|||||||
use <d_connector.scad>
|
use <d_connector.scad>
|
||||||
use <led.scad>
|
use <led.scad>
|
||||||
use <dip.scad>
|
use <dip.scad>
|
||||||
|
use <axial.scad>
|
||||||
|
|
||||||
function pcb_name(type) = type[1]; //! Description
|
function pcb_name(type) = type[1]; //! Description
|
||||||
function pcb_length(type) = type[2]; //! Length
|
function pcb_length(type) = type[2]; //! Length
|
||||||
@ -825,6 +826,7 @@ module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb compon
|
|||||||
if(show(comp, "trimpot10")) trimpot10(param(4, false), cutouts);
|
if(show(comp, "trimpot10")) trimpot10(param(4, false), cutouts);
|
||||||
if(show(comp, "led")) led(comp[4], comp[5], 2.6);
|
if(show(comp, "led")) led(comp[4], comp[5], 2.6);
|
||||||
if(show(comp, "pdip")) pdip(comp[4], comp[5], param(6, false), param(7, inch(0.3)));
|
if(show(comp, "pdip")) pdip(comp[4], comp[5], param(6, false), param(7, inch(0.3)));
|
||||||
|
if(show(comp, "ax_res")) ax_res(comp[4], comp[5], param(6, 5), param(7, 0));
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|||||||
@ -19,6 +19,7 @@
|
|||||||
include <microswitches.scad>
|
include <microswitches.scad>
|
||||||
include <d_connectors.scad>
|
include <d_connectors.scad>
|
||||||
include <leds.scad>
|
include <leds.scad>
|
||||||
|
include <axials.scad>
|
||||||
|
|
||||||
//
|
//
|
||||||
// l w t r h l c b h
|
// l w t r h l c b h
|
||||||
@ -335,6 +336,7 @@ ZC_A0591 = ["ZC_A0591", "ZC-A0591 ULN2003 driver PCB", 35, 32, 1.6, 0, 2.5, 0, "
|
|||||||
[ 5.5, 10.5, 0, "led", LED3mm, [1,1,1, 0.5]],
|
[ 5.5, 10.5, 0, "led", LED3mm, [1,1,1, 0.5]],
|
||||||
[ 5.5, 15, 0, "led", LED3mm, [1,1,1, 0.5]],
|
[ 5.5, 15, 0, "led", LED3mm, [1,1,1, 0.5]],
|
||||||
[ 5.5, 19.5, 0, "led", LED3mm, [1,1,1, 0.5]],
|
[ 5.5, 19.5, 0, "led", LED3mm, [1,1,1, 0.5]],
|
||||||
|
for(i = [0 : 3]) [5.5 + inch(0.1) * i, -5.5, -90, "ax_res", res1_8, 510, 5, 5.5]
|
||||||
|
|
||||||
], [], [], [], M2p5_pan_screw];
|
], [], [], [], M2p5_pan_screw];
|
||||||
|
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user