Added panel_meters for panel mount digital meters.

lib.scad

@@ -44,6 +44,7 @@ include <vitamins/led_meter.scad>
 include <vitamins/light_strips.scad>
 include <vitamins/mains_sockets.scad>
 include <vitamins/modules.scad>
+include <vitamins/panel_meters.scad>
 include <vitamins/pillars.scad>
 include <vitamins/pin_headers.scad>
 include <vitamins/pulleys.scad>

libtest.scad

@@ -54,6 +54,7 @@ use <tests/modules.scad>
 use <tests/nuts.scad>
 use <tests/o_ring.scad>
 use <tests/opengrab.scad>
+use <tests/panel_meters.scad>
 use <tests/PCBs.scad>
 use <tests/pillars.scad>
 use <tests/PSUs.scad>
@@ -321,7 +322,8 @@ ssrs_y = modules_y + 80;
 blowers_y = ssrs_y + 60;
 batteries_y = blowers_y + 100;
 steppers_y = batteries_y + 70;
-extrusions_y = steppers_y + 100;
+panel_meters_y = steppers_y + 70;
+extrusions_y = panel_meters_y + 80;
 
 translate([x3, veroboard_y])
     veroboard_test();
@@ -362,9 +364,11 @@ translate([x3, batteries_y])
 translate([x2, steppers_y])  // interloper
     stepper_motors();
 
-translate([x2, extrusions_y]) {
+translate([x2, panel_meters_y])
+    panel_meters();
+
+translate([x2, extrusions_y])
     extrusions();
-}
 
 translate([x3, transformers_y])
     transformers();

readme.md

@@ -36,10 +36,10 @@ See [usage](docs/usage.md) for requirements, installation instructions and a usa
 <tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
 <tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
 <tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#IECs">IECs</a> </td><td></td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#IECs">IECs</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
 <tr><td> <a href = "#Inserts">Inserts</a> </td><td></td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
 <tr><td></td><td></td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
 </table>
@@ -1947,6 +1947,60 @@ A permanent magnet that can be magnatized and de-magnatized electronically.
 |   1 | ```opengrab()``` |  OpenGrab V3 electro permanent magnet |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Panel_meters"></a>
+## Panel_meters
+Panel mounted digital meter modules
+
+Notes on the DSN_VC288:
+
+* The tabs aren't modelled because they can be fully retracted if the PCB is removed.
+* The current connector isn't moddelled as it is awkwardly tall. I remove it and solder wires instead.
+
+
+[vitamins/panel_meters.scad](vitamins/panel_meters.scad) Object definitions.
+
+[vitamins/panel_meter.scad](vitamins/panel_meter.scad) Implementation.
+
+[tests/panel_meters.scad](tests/panel_meters.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| ```pmeter_aperture(type)``` | Aperture length, width and bevel |
+| ```pmeter_bevel(type)``` | Bezel bevel inset and start height |
+| ```pmeter_bezel(type)``` | Bezel size |
+| ```pmeter_bezel_r(type)``` | Bezel radius |
+| ```pmeter_pcb(type)``` | Optional PCB for open types |
+| ```pmeter_pcb_z(type)``` | Distance of PCB from the back |
+| ```pmeter_size(type)``` | Body size including bezel height |
+| ```pmeter_tab(type)``` | Tab size |
+| ```pmeter_tab_z(type)``` | Tab vertical position |
+| ```pmeter_thickness(type)``` | Wall thickness if not closed |
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| ```pmeter_depth(type)``` | Depth below bezel |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| ```panel_meter(type)``` | Draw panel mounted LCD meter module |
+| ```panel_meter_cutout(type, h = 0)``` | Make panel cutout |
+
+![panel_meters](tests/png/panel_meters.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | ```panel_meter(DSN_VC288)``` |  DSN-VC288 DC 100V 10A Voltmeter ammeter |
+|   1 | ```panel_meter(PZEM001)``` |  Peacefair PZEM-001 AC digital multi-function meter |
+|   1 | ```panel_meter(PZEM021)``` |  Peacefair PZEM-021 AC digital multi-function meter |
+
+
 <a href="#top">Top</a>
 
 ---

tests/panel_meters.scad

@@ -0,0 +1,29 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../core.scad>
+use <../utils/layout.scad>
+
+include <../vitamins/panel_meters.scad>
+
+module panel_meters()
+    layout([for(p = panel_meters) pmeter_size(p).x], 20)
+        panel_meter(panel_meters[$i]);
+
+if($preview)
+    panel_meters();

vitamins/led_meter.scad

@@ -128,6 +128,7 @@ module meter_bezel(type) { //! Generate the STL for the meter bezel
 
                 square([l + 2 * clearance, w + 2 * clearance], center = true);
         }
+
         translate([0, -meter_pos(type)])
             meter_hole_positions(type)
                 cylinder(r = meter_hole_radius(type), h = h + meter_pcb_size(type).z * 2);

vitamins/panel_meter.scad

@@ -0,0 +1,110 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Panel mounted digital meter modules
+//!
+//! Notes on the DSN_VC288:
+//!
+//! * The tabs aren't modelled because they can be fully retracted if the PCB is removed.
+//! * The current connector isn't moddelled as it is awkwardly tall. I remove it and solder wires instead.
+//
+include <../utils/core/core.scad>
+
+use <../utils/dogbones.scad>
+use <pcb.scad>
+
+function pmeter_size(type)      = type[2]; //! Body size including bezel height
+function pmeter_bezel(type)     = type[3]; //! Bezel size
+function pmeter_bezel_r(type)   = type[4]; //! Bezel radius
+function pmeter_bevel(type)     = type[5]; //! Bezel bevel inset and start height
+function pmeter_aperture(type)  = type[6]; //! Aperture length, width and bevel
+function pmeter_tab(type)       = type[7]; //! Tab size
+function pmeter_tab_z(type)     = type[8]; //! Tab vertical position
+function pmeter_thickness(type) = type[9]; //! Wall thickness if not closed
+function pmeter_pcb(type)       = type[10]; //! Optional PCB for open types
+function pmeter_pcb_z(type)     = type[11]; //! Distance of PCB from the back
+
+function pmeter_depth(type) = pmeter_size(type).z - pmeter_bezel(type).z; //! Depth below bezel
+
+module panel_meter(type) { //! Draw panel mounted LCD meter module
+    vitamin(str("panel_meter(", type[0], "): ", type[1]));
+    size = pmeter_size(type);
+    bezel = pmeter_bezel(type);
+    bevel = pmeter_bevel(type);
+    t = pmeter_thickness(type);
+    r = pmeter_bezel_r(type);
+    h = size.z - bezel.z;
+    app = pmeter_aperture(type);
+    tab = pmeter_tab(type);
+    tab_z = pmeter_tab_z(type);
+    pcb = pmeter_pcb(type);
+
+    color("#94A7AB")
+        cube([app.x, app.y, 3 * eps], center = true);
+
+    color(grey30) union() {
+        difference() {
+            hull() {
+                rounded_rectangle([bezel.x - 2 * bevel.x, bezel.y - 2 * bevel.x, bezel.z], r - bevel.x, center = false);
+                rounded_rectangle([bezel.x, bezel.y, bevel[1]],r, center = false);
+            }
+            hull() {
+                translate_z(bezel.z + eps) {
+                    cube([app.x + app.z, app.y + app.z, eps], center = true);
+
+                    cube([app.x, app.y, bezel.z * 2], center = true);
+                }
+            }
+        }
+
+        translate_z(-h)
+            linear_extrude(h)
+                difference() {
+                    square([size.x, size.y], center = true);
+
+                    if(t)
+                        square([size.x - 2 * t, size.y - 2 * t], center = true);
+                }
+
+        if(tab)
+            for(end = [-1, 1])
+                translate([end * (size.x / 2 + tab.x / 2), 0, -size.z + tab_z])
+                    rotate([0, end * 10, 0])
+                        translate_z(tab.z / 2)
+                            cube([tab.x, tab.y, tab.z], center = true);
+
+    }
+    if(pcb)
+        vflip()
+            translate_z(h - pcb_thickness(pcb) - pmeter_pcb_z(type))
+                pcb(pcb);
+}
+
+module panel_meter_cutout(type, h = 0) { //! Make panel cutout
+    size = pmeter_size(type);
+    tab = pmeter_tab(type);
+    extrude_if(h)
+        offset(0.2) {
+            dogbone_square([size.x, size.y]);
+
+            if(tab)
+                rounded_square([size.x + 2 * tab.x, tab.y + 2 * cnc_bit_r], r = cnc_bit_r, center = true);
+        }
+}

vitamins/panel_meters.scad

@@ -0,0 +1,38 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Panel mounted digital meter modules
+//
+
+PZEM021   = ["PZEM021",  "Peacefair PZEM-021 AC digital multi-function meter", [84.6, 44.7, 24.4], [89.6, 49.6, 2.3], 1.5, [1, 1],   [51, 30, 5], [1.3, 10, 6], 15.5, 0];
+PZEM001   = ["PZEM001",  "Peacefair PZEM-001 AC digital multi-function meter", [62  , 52.5, 24.4], [67,   57.5, 2.0], 1.5, [1, 1],   [36, 36, 0], [1.2, 10, 6], 15.5, 0];
+
+DSN_VC288PCB = ["", "", 41, 21, 1, 0, 0, 0, "green", false, [],
+      [ [ 5,  -3,   0, "jst_xh", 3],
+
+      ],
+      []];
+
+DSN_VC288 = ["DSN_VC288","DSN-VC288 DC 100V 10A Voltmeter ammeter",            [45.3, 26,   17.4], [47.8, 28.8, 2.5], 0,   [1, 1.8], [36, 18, 2.5], [],            0, 2,
+             DSN_VC288PCB, 5];
+
+panel_meters = [DSN_VC288, PZEM021, PZEM001];
+
+use <panel_meter.scad>