Merge branch 'master' into Execute_attributes
This commit is contained in:
Chris Palmer
commit
46004381b7
Binary file not shown.
|
After Width: | Height: | Size: 124 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 206 KiB |
|
|
@ -6,6 +6,13 @@ Arduino thermostat to control a beer fridge to use it as an environmental chambe
|
|||
|
||||
|
||||
|
||||
<a name="TOP"></a>
|
||||
## FilamentDryBox
|
||||
A small fan oven with a spool holder to keep the filament warm and dry.
|
||||
|
||||
|
||||
|
||||
|
||||
<a name="TOP"></a>
|
||||
## HydraBot
|
||||
Current state of HydraRaptor after being modified for laser engraving.
|
||||
|
|
@ -68,6 +75,13 @@ Mains isolated and variable supply with metering.
|
|||
|
||||
|
||||
|
||||
<a name="TOP"></a>
|
||||
## SunBot
|
||||
A solar tracker to keep solar powerbanks pointing at the sun.
|
||||
|
||||
|
||||
|
||||
|
||||
<a name="TOP"></a>
|
||||
## Turntable
|
||||
WiFi enabled remote control turntable for photography
|
||||
|
|
|
|||
1
lib.scad
1
lib.scad
|
|
@ -66,6 +66,7 @@ include <vitamins/geared_steppers.scad>
|
|||
use <vitamins/jack.scad>
|
||||
use <vitamins/meter.scad>
|
||||
use <vitamins/fuseholder.scad>
|
||||
use <vitamins/hygrometer.scad>
|
||||
|
||||
use <vitamins/opengrab.scad>
|
||||
use <vitamins/wire.scad>
|
||||
|
|
|
|||
BIN
libtest.png
BIN
libtest.png
Binary file not shown.
|
Before Width: | Height: | Size: 708 KiB After Width: | Height: | Size: 716 KiB |
|
|
@ -313,7 +313,10 @@ translate([x3, iecs_y])
|
|||
translate([x3 + 15, modules_y])
|
||||
microview();
|
||||
|
||||
translate([x3 + 40, modules_y])
|
||||
translate([x3 + 60, modules_y])
|
||||
hygrometer();
|
||||
|
||||
translate([x3 + 90, modules_y])
|
||||
modules();
|
||||
|
||||
translate([x3, ssrs_y]) {
|
||||
|
|
|
|||
|
|
@ -139,8 +139,8 @@ module psu_shroud(type, cable_d, name, cables = 1) { //! Generate the STL file f
|
|||
mirror([0, 1, 0])
|
||||
psu_shroud_hole_positions(type)
|
||||
translate_z(height)
|
||||
rotate(90)
|
||||
insert_lug(insert, wall, $side, counter_bore);
|
||||
rotate($side * 90)
|
||||
insert_lug(insert, wall, counter_bore);
|
||||
}
|
||||
|
||||
module psu_shroud_assembly(type, cable_d, name, cables = 1) //! The printed parts with inserts fitted
|
||||
|
|
|
|||
|
|
@ -103,8 +103,8 @@ module ssr_shroud(type, cable_d, name) { //! Generate the STL file for a spec
|
|||
ssr_shroud_hole_positions(type)
|
||||
vflip()
|
||||
translate_z(height)
|
||||
rotate(90)
|
||||
insert_lug(insert, wall, $side, counter_bore);
|
||||
rotate($side * 90)
|
||||
insert_lug(insert, wall, counter_bore);
|
||||
}
|
||||
|
||||
module ssr_shroud_assembly(type, cable_d, name) //! The printed parts with inserts fitted
|
||||
|
|
|
|||
101
readme.md
101
readme.md
|
|
@ -17,25 +17,26 @@ See [usage](docs/usage.md) for requirements, installation instructions and a usa
|
|||
|
||||
## Table of Contents<a name="top"/>
|
||||
<table><tr>
|
||||
<th align="left"> Vitamins A-N </th><th align="left"> Vitamins O-Z </th><th align="left"> Printed </th><th align="left"> Utilities </th><th align="left"> Core Utilities </th></tr>
|
||||
<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#Bom">Bom</a> </td></tr>
|
||||
<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
|
||||
<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#Pcbs">Pcbs</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Global">Global</a> </td></tr>
|
||||
<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
|
||||
<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
|
||||
<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Psus">Psus</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Layout">Layout</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
|
||||
<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Maths">Maths</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
|
||||
<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Psu_shroud">Psu_shroud</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Iecs">Iecs</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Ssr_shroud">Ssr_shroud</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Ssrs">Ssrs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
|
||||
<th align="left"> Vitamins A-M </th><th align="left"> Vitamins N-Z </th><th align="left"> Printed </th><th align="left"> Utilities </th><th align="left"> Core Utilities </th></tr>
|
||||
<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#Bom">Bom</a> </td></tr>
|
||||
<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
|
||||
<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Global">Global</a> </td></tr>
|
||||
<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Pcbs">Pcbs</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
|
||||
<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
|
||||
<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Layout">Layout</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
|
||||
<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Psus">Psus</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Maths">Maths</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
|
||||
<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Psu_shroud">Psu_shroud</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Iecs">Iecs</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Ssr_shroud">Ssr_shroud</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Ssrs">Ssrs</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Ldrs">Ldrs</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Leds">Leds</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td></td><td></td><td></td></tr>
|
||||
|
|
@ -46,7 +47,6 @@ See [usage](docs/usage.md) for requirements, installation instructions and a usa
|
|||
<tr><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Modules">Modules</a> </td><td></td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Nuts">Nuts</a> </td><td></td><td></td><td></td><td></td></tr>
|
||||
</table>
|
||||
|
||||
---
|
||||
|
|
@ -165,6 +165,8 @@ exposing enough information to make a battery box.
|
|||
Models timing belt running over toothed or smooth pulleys and calculates an accurate length.
|
||||
Only models 2D paths, so not core XY!
|
||||
|
||||
To make the back of the belt run against a smooth pulley on the outside of the loop specify a negative pitch radius.
|
||||
|
||||
By default the path is a closed loop but a gap length and position can be specified to make open loops.
|
||||
|
||||
Individual teeth are not drawn, instead they are represented by a lighter colour.
|
||||
|
|
@ -849,6 +851,37 @@ Needs updating as mostly obsolete versions.
|
|||
| 4 | ```ziptie(small_ziptie, 8)``` | Ziptie 2.5mm x 100mm min length |
|
||||
|
||||
|
||||
<a href="#top">Top</a>
|
||||
|
||||
---
|
||||
<a name="Hygrometer"></a>
|
||||
## Hygrometer
|
||||
Mini LCD Celsius Digital Thermometer Hygrometer Temperature Humidity Meter Gauge on eBay
|
||||
|
||||
|
||||
[vitamins/hygrometer.scad](vitamins/hygrometer.scad) Implementation.
|
||||
|
||||
[tests/hygrometer.scad](tests/hygrometer.scad) Code for this example.
|
||||
|
||||
### Functions
|
||||
| Function | Description |
|
||||
|:--- |:--- |
|
||||
| ```hygrometer_or()``` | The outside radius of a hygrometer |
|
||||
|
||||
### Modules
|
||||
| Module | Description |
|
||||
|:--- |:--- |
|
||||
| ```hygrometer()``` | Draw a hygrometer |
|
||||
| ```hygrometer_hole(h = 0)``` | Drill the hole for a hygrometer |
|
||||
|
||||
|
||||
|
||||
### Vitamins
|
||||
| Qty | Module call | BOM entry |
|
||||
| ---:|:--- |:---|
|
||||
| 1 | ```hygrometer()``` | Mini LCD Digital Thermometer / Hygrometer |
|
||||
|
||||
|
||||
<a href="#top">Top</a>
|
||||
|
||||
---
|
||||
|
|
@ -953,7 +986,7 @@ Heatfit threaded inserts. Can be pushed into thermoplastics using a soldering ir
|
|||
| ```insert(type)``` | Draw specified insert |
|
||||
| ```insert_boss(type, z, wall = 2 * extrusion_width)``` | Make a boss to take an insert |
|
||||
| ```insert_hole(type, counterbore = 0, horizontal = false)``` | Make a hole to take an insert, ```counterbore``` is the extra length for the screw |
|
||||
| ```insert_lug(insert, wall, side, counter_bore = 0)``` | Make a flying insert lug, see [ssr_shroud](#Ssr_shroud) |
|
||||
| ```insert_lug(insert, wall, counter_bore = 0, extension = 0, corner_r = 0, flying = true)``` | Make a flying insert lug, see [ssr_shroud](#Ssr_shroud) |
|
||||
|
||||
|
||||
|
||||
|
|
@ -1676,6 +1709,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
|
|||
### Vitamins
|
||||
| Qty | Module call | BOM entry |
|
||||
| ---:|:--- |:---|
|
||||
| 1 | ```pcb(ArduinoLeonardo)``` | Arduino Leonardo |
|
||||
| 1 | ```pcb(ArduinoUno3)``` | Arduino Uno R3 |
|
||||
| 1 | | Cat 5 patch cable 300mm |
|
||||
| 1 | ```d_plug(DCONN15, pcb = true)``` | D-type 15 way PCB mount plug |
|
||||
|
|
@ -1689,7 +1723,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
|
|||
| 1 | ```molex_254(2)``` | Molex KK header 2 way |
|
||||
| 1 | ```molex_254(3)``` | Molex KK header 3 way |
|
||||
| 16 | ```nut(M2_nut, nyloc = true)``` | Nut M2 x 1.6mm nyloc |
|
||||
| 16 | ```nut(M2p5_nut, nyloc = true)``` | Nut M2.5 x 2.2mm nyloc |
|
||||
| 20 | ```nut(M2p5_nut, nyloc = true)``` | Nut M2.5 x 2.2mm nyloc |
|
||||
| 12 | ```nut(M3_nut, nyloc = true)``` | Nut M3 x 2.4mm nyloc |
|
||||
| 12 | ```nut(M4_nut, nyloc = true)``` | Nut M4 x 3.2mm nyloc |
|
||||
| 1 | ```pcb(PI_IO)``` | PI_IO V2 |
|
||||
|
|
@ -1701,19 +1735,19 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
|
|||
| 1 | ```pcb(PERF80x20)``` | Perfboard 80 x 20mm |
|
||||
| 1 | ```pin_socket(2p54header, 13, 2, right_angle = true)``` | Pin socket 13 x 2 right_angle |
|
||||
| 1 | ```pcb(RPI3)``` | Raspberry Pi 3 |
|
||||
| 12 | ```screw(M2_cap_screw, 20)``` | Screw M2 cap x 20mm |
|
||||
| 4 | ```screw(M2_cap_screw, 25)``` | Screw M2 cap x 25mm |
|
||||
| 8 | ```screw(M2_cap_screw, 20)``` | Screw M2 cap x 20mm |
|
||||
| 8 | ```screw(M2_cap_screw, 25)``` | Screw M2 cap x 25mm |
|
||||
| 4 | ```screw(M2p5_cap_screw, 16)``` | Screw M2.5 cap x 16mm |
|
||||
| 8 | ```screw(M2p5_pan_screw, 20)``` | Screw M2.5 pan x 20mm |
|
||||
| 12 | ```screw(M2p5_pan_screw, 20)``` | Screw M2.5 pan x 20mm |
|
||||
| 4 | ```screw(M2p5_pan_screw, 30)``` | Screw M2.5 pan x 30mm |
|
||||
| 8 | ```screw(M3_cap_screw, 25)``` | Screw M3 cap x 25mm |
|
||||
| 4 | ```screw(M3_cap_screw, 30)``` | Screw M3 cap x 30mm |
|
||||
| 4 | ```screw(M3_cap_screw, 25)``` | Screw M3 cap x 25mm |
|
||||
| 8 | ```screw(M3_cap_screw, 30)``` | Screw M3 cap x 30mm |
|
||||
| 12 | ```screw(M4_cap_screw, 30)``` | Screw M4 cap x 30mm |
|
||||
| 3 | ```terminal_35(2)``` | Terminal block 2 way 3.5mm |
|
||||
| 2 | ```green_terminal(gt_2p54, 4)``` | Terminal block 4 way 0.1" |
|
||||
| 1 | | USB A to Mini B lead |
|
||||
| 16 | ```washer(M2_washer)``` | Washer M2 x 5mm x 0.3mm |
|
||||
| 16 | ```washer(M2p5_washer)``` | Washer M2.5 x 5.9mm x 0.5mm |
|
||||
| 20 | ```washer(M2p5_washer)``` | Washer M2.5 x 5.9mm x 0.5mm |
|
||||
| 12 | ```washer(M3_washer)``` | Washer M3 x 7mm x 0.5mm |
|
||||
| 12 | ```washer(M4_washer)``` | Washer M4 x 9mm x 0.8mm |
|
||||
| 1 | ```pcb(ZC_A0591)``` | ZC-A0591 ULN2003 driver PCB |
|
||||
|
|
@ -1721,20 +1755,21 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
|
|||
### Printed
|
||||
| Qty | Filename |
|
||||
| ---:|:--- |
|
||||
| 4 | pcb_spacer20100.stl |
|
||||
| 4 | pcb_spacer20110.stl |
|
||||
| 4 | pcb_spacer20120.stl |
|
||||
| 4 | pcb_spacer20130.stl |
|
||||
| 4 | pcb_spacer25200.stl |
|
||||
| 4 | pcb_spacer20140.stl |
|
||||
| 4 | pcb_spacer25100_2.stl |
|
||||
| 4 | pcb_spacer25210.stl |
|
||||
| 4 | pcb_spacer2570.stl |
|
||||
| 4 | pcb_spacer2580_2.stl |
|
||||
| 4 | pcb_spacer2590_2.stl |
|
||||
| 4 | pcb_spacer30140.stl |
|
||||
| 4 | pcb_spacer30150.stl |
|
||||
| 4 | pcb_spacer30190.stl |
|
||||
| 4 | pcb_spacer40160.stl |
|
||||
| 4 | pcb_spacer30160.stl |
|
||||
| 4 | pcb_spacer30200.stl |
|
||||
| 4 | pcb_spacer40170.stl |
|
||||
| 4 | pcb_spacer40180.stl |
|
||||
| 4 | pcb_spacer40190.stl |
|
||||
|
||||
|
||||
<a href="#top">Top</a>
|
||||
|
|
|
|||
|
|
@ -138,7 +138,7 @@ def tests(tests):
|
|||
print("Can't find implementation!")
|
||||
continue
|
||||
|
||||
vsplit = "N"
|
||||
vsplit = "M"
|
||||
vtype = locations[0][1]
|
||||
types = [vtype + ' A-' + vsplit[0], vtype + ' ' + chr(ord(vsplit) + 1) + '-Z'] + [loc[1] for loc in locations[1 :]]
|
||||
if type == vtype:
|
||||
|
|
|
|||
|
|
@ -0,0 +1,22 @@
|
|||
//
|
||||
// NopSCADlib Copyright Chris Palmer 2018
|
||||
// nop.head@gmail.com
|
||||
// hydraraptor.blogspot.com
|
||||
//
|
||||
// This file is part of NopSCADlib.
|
||||
//
|
||||
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
|
||||
// GNU General Public License as published by the Free Software Foundation, either version 3 of
|
||||
// the License, or (at your option) any later version.
|
||||
//
|
||||
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
||||
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
// See the GNU General Public License for more details.
|
||||
//
|
||||
// You should have received a copy of the GNU General Public License along with NopSCADlib.
|
||||
// If not, see <https://www.gnu.org/licenses/>.
|
||||
//
|
||||
use <../vitamins/hygrometer.scad>
|
||||
|
||||
if($preview)
|
||||
hygrometer();
|
||||
|
|
@ -21,10 +21,20 @@ use <../utils/layout.scad>
|
|||
|
||||
include <../vitamins/inserts.scad>
|
||||
|
||||
module inserts()
|
||||
module inserts() {
|
||||
|
||||
for(i = [0: len(inserts) -1])
|
||||
translate([10 * i, 0])
|
||||
insert(inserts[i]);
|
||||
|
||||
color(pp1_colour)
|
||||
translate([len(inserts) * 10, 0]) {
|
||||
insert_lug(inserts[0], 2, 1);
|
||||
|
||||
translate([10, 0])
|
||||
insert_boss(inserts[0], z = 10, wall = 2);
|
||||
}
|
||||
}
|
||||
|
||||
if($preview)
|
||||
inserts();
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@ include <../vitamins/d_connectors.scad>
|
|||
include <../vitamins/pcbs.scad>
|
||||
|
||||
module pcbs()
|
||||
layout([for(p = pcbs) pcb_width(p)], 15)
|
||||
layout([for(p = pcbs) pcb_width(p)], 10)
|
||||
translate([0, pcb_length(pcbs[$i]) / 2])
|
||||
rotate(90)
|
||||
pcb_assembly(pcbs[$i], 5 + $i, 3);
|
||||
|
|
|
|||
Binary file not shown.
|
After Width: | Height: | Size: 73 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 90 KiB After Width: | Height: | Size: 78 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 149 KiB After Width: | Height: | Size: 153 KiB |
|
|
@ -21,6 +21,8 @@
|
|||
//! Models timing belt running over toothed or smooth pulleys and calculates an accurate length.
|
||||
//! Only models 2D paths, so not core XY!
|
||||
//!
|
||||
//! To make the back of the belt run against a smooth pulley on the outside of the loop specify a negative pitch radius.
|
||||
//!
|
||||
//! By default the path is a closed loop but a gap length and position can be specified to make open loops.
|
||||
//!
|
||||
//! Individual teeth are not drawn, instead they are represented by a lighter colour.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,86 @@
|
|||
//
|
||||
// NopSCADlib Copyright Chris Palmer 2018
|
||||
// nop.head@gmail.com
|
||||
// hydraraptor.blogspot.com
|
||||
//
|
||||
// This file is part of NopSCADlib.
|
||||
//
|
||||
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
|
||||
// GNU General Public License as published by the Free Software Foundation, either version 3 of
|
||||
// the License, or (at your option) any later version.
|
||||
//
|
||||
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
||||
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
// See the GNU General Public License for more details.
|
||||
//
|
||||
// You should have received a copy of the GNU General Public License along with NopSCADlib.
|
||||
// If not, see <https://www.gnu.org/licenses/>.
|
||||
//
|
||||
|
||||
//
|
||||
//! Mini LCD Celsius Digital Thermometer Hygrometer Temperature Humidity Meter Gauge on eBay
|
||||
//
|
||||
include <../core.scad>
|
||||
|
||||
od = 40.9;
|
||||
h = 14;
|
||||
flange_d = 45.5;
|
||||
flange_t = 1.5;
|
||||
flange_d2 = 32;
|
||||
flange_t2 = 2;
|
||||
apperture_d = 24.7;
|
||||
hygrometer_hole_r = 21.3;
|
||||
slot_w = 5.5;
|
||||
|
||||
module hygrometer_hole(h = 0) { //! Drill the hole for a hygrometer
|
||||
round(cnc_bit_r) {
|
||||
intersection() {
|
||||
drill(hygrometer_hole_r, h);
|
||||
|
||||
rotate(30)
|
||||
square([slot_w + 2 * cnc_bit_r, 100], center = true);
|
||||
}
|
||||
drill((od + 0.2) / 2, h);
|
||||
}
|
||||
}
|
||||
|
||||
function hygrometer_or() = flange_d / 2; //! The outside radius of a hygrometer
|
||||
|
||||
module hygrometer() { //! Draw a hygrometer
|
||||
vitamin("hygrometer(): Mini LCD Digital Thermometer / Hygrometer");
|
||||
|
||||
explode(40) {
|
||||
color(grey30)
|
||||
rotate_extrude()
|
||||
polygon([
|
||||
[0, 0],
|
||||
[apperture_d / 2, 0],
|
||||
[apperture_d / 2, flange_t],
|
||||
[flange_d2 / 2, flange_t2],
|
||||
[flange_d / 2, flange_t],
|
||||
[flange_d / 2, 0],
|
||||
[od / 2, 0],
|
||||
[od / 2, -h],
|
||||
[0, -h]
|
||||
]);
|
||||
|
||||
color("#94A7AB")
|
||||
cylinder(d = apperture_d, h = eps);
|
||||
|
||||
color("black")
|
||||
linear_extrude(height = 0.2, center = true) {
|
||||
translate([0, 3])
|
||||
text("20_4", font = "7 segment", valign = "bottom", halign = "center", size = apperture_d / 6);
|
||||
|
||||
translate([7, 3])
|
||||
text("C", font = "7 segment", valign = "bottom", halign = "center", size = apperture_d / 8);
|
||||
|
||||
translate([-1.9, 0.5])
|
||||
text("50", font = "7 segment", valign = "top", halign = "center", size = apperture_d / 2.7);
|
||||
|
||||
translate([0, -apperture_d / 6])
|
||||
text(" %", font = "Arial", valign = "center", halign = "center", size = apperture_d / 6);
|
||||
}
|
||||
|
||||
}
|
||||
}
|
||||
|
|
@ -21,6 +21,7 @@
|
|||
//! Heatfit threaded inserts. Can be pushed into thermoplastics using a soldering iron with a conical bit set to 200°C.
|
||||
//
|
||||
include <../core.scad>
|
||||
use <../utils/quadrant.scad>
|
||||
|
||||
function insert_length(type) = type[1]; //! Length
|
||||
function insert_outer_d(type) = type[2]; //! Outer diameter at the top
|
||||
|
|
@ -96,31 +97,52 @@ module insert_hole(type, counterbore = 0, horizontal = false) { //! Make a hole
|
|||
function insert_boss_radius(type, wall) = corrected_radius(insert_hole_radius(type)) + wall; //! Compute the outer radius of an insert boss
|
||||
|
||||
module insert_boss(type, z, wall = 2 * extrusion_width) { //! Make a boss to take an insert
|
||||
render(convexity = 3)
|
||||
difference() {
|
||||
ir = insert_hole_radius(type);
|
||||
linear_extrude(height = z)
|
||||
or = corrected_radius(ir) + wall;
|
||||
|
||||
module shape()
|
||||
hull()
|
||||
poly_ring(corrected_radius(ir) + wall, ir);
|
||||
poly_ring(or, ir);
|
||||
|
||||
translate_z(z)
|
||||
insert_hole(type, max(0, z - insert_hole_length(type) - 2 * layer_height));
|
||||
}
|
||||
linear_extrude(height = z)
|
||||
poly_ring(or, ir);
|
||||
|
||||
linear_extrude(height = z - insert_hole_length(type))
|
||||
difference() {
|
||||
shape();
|
||||
|
||||
poly_circle(insert_screw_diameter(type) / 2 + 0.1);
|
||||
}
|
||||
|
||||
module insert_lug(insert, wall, side, counter_bore = 0) { //! Make a flying insert lug, see [ssr_shroud](#Ssr_shroud)
|
||||
if(z > insert_hole_length(type) + 2 * layer_height)
|
||||
linear_extrude(height = 2 * layer_height) // cap the end if room
|
||||
shape();
|
||||
}
|
||||
|
||||
module insert_lug(insert, wall, counter_bore = 0, extension = 0, corner_r = 0, flying = true) { //! Make a flying insert lug, see [ssr_shroud](#Ssr_shroud)
|
||||
boss_r = insert_boss_radius(insert, wall);
|
||||
boss_h = insert_hole_length(insert);
|
||||
boss_h2 = boss_h + counter_bore;
|
||||
translate_z(-boss_h)
|
||||
linear_extrude(height = boss_h)
|
||||
difference() {
|
||||
|
||||
module shape()
|
||||
intersection() {
|
||||
hull() {
|
||||
circle(boss_r);
|
||||
|
||||
translate([side * (boss_r - 1), 0])
|
||||
translate([boss_r + extension - eps, 0])
|
||||
square([eps, 2 * boss_r], center = true);
|
||||
}
|
||||
if(corner_r)
|
||||
translate([boss_r + extension - corner_r, 0])
|
||||
rotate(-45)
|
||||
quadrant(w = 100, r = corner_r - eps, center = true);
|
||||
}
|
||||
|
||||
translate_z(-boss_h)
|
||||
linear_extrude(height = boss_h)
|
||||
difference() {
|
||||
shape();
|
||||
|
||||
poly_circle(insert_hole_radius(insert));
|
||||
}
|
||||
|
||||
|
|
@ -128,23 +150,18 @@ module insert_lug(insert, wall, side, counter_bore = 0) { //! Make a flying inse
|
|||
translate_z(-boss_h2) {
|
||||
linear_extrude(height = counter_bore + eps)
|
||||
difference() {
|
||||
hull() {
|
||||
circle(boss_r);
|
||||
shape();
|
||||
|
||||
translate([side * (boss_r - 1), 0])
|
||||
square([eps, 2 * boss_r], center = true);
|
||||
}
|
||||
poly_circle(insert_screw_diameter(insert) / 2 + 0.1);
|
||||
}
|
||||
|
||||
// support cones
|
||||
// support cone
|
||||
if(flying)
|
||||
hull() {
|
||||
cylinder(h = eps, r = boss_r - eps);
|
||||
linear_extrude(height = eps)
|
||||
shape();
|
||||
|
||||
translate([side * (boss_r - 1), 0])
|
||||
cube([eps, 2 * boss_r, eps], center = true);
|
||||
|
||||
translate([side * (boss_r - wall + eps), 0, - (2 * boss_r - wall)])
|
||||
translate([boss_r + extension - wall - eps, 0, - (2 * boss_r + extension - wall)])
|
||||
cube(eps, center = true);
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -237,6 +237,32 @@ ArduinoUno3 = ["ArduinoUno3", "Arduino Uno R3", 68.58, 53.34, 1.6, 0, 3.3, 0, "#
|
|||
M2p5_pan_screw
|
||||
];
|
||||
|
||||
ArduinoLeonardo = ["ArduinoLeonardo", "Arduino Leonardo", 68.58, 53.34, 1.6, 0, 3.3, 0, "#2140BE", false, [[15.24, 50.8],[66.04, 35.56],[66.04, 7.62],[13.97, 2.54]],
|
||||
[[30.226, -2.54, 0, "2p54socket", 10, 1],
|
||||
[54.61, -2.54, 0, "2p54socket", 8, 1],
|
||||
[36.83, 2.54, 0, "2p54socket", 8, 1],
|
||||
[57.15, 2.54, 0, "2p54socket", 6, 1],
|
||||
[64.91, 27.89, 0, "2p54header", 2, 3],
|
||||
[ 6.5, -3.5, 0, "button_6mm"],
|
||||
[4.7625, 7.62, 180, "barrel_jack"],
|
||||
[1.5875, 38.1, 180,"usb_uA"],
|
||||
],
|
||||
[],[],
|
||||
inch([
|
||||
[-1.35, -1.05],
|
||||
[-1.35, 1.05],
|
||||
[ 1.19, 1.05],
|
||||
[ 1.25, 0.99],
|
||||
[ 1.25, 0.54],
|
||||
[ 1.35, 0.44],
|
||||
[ 1.35, -0.85],
|
||||
[ 1.25, -0.95],
|
||||
[ 1.25, -1.05],
|
||||
]),
|
||||
M2p5_pan_screw
|
||||
];
|
||||
|
||||
|
||||
Keyes5p1 = ["Keyes5p1", "Keyes5.1 Arduino Uno expansion board", 68.58, 53.34, 1.6, 0, 3.3, 0, "#2140BE", false, [[15.24, 50.8],[66.04, 35.56],[66.04, 7.62],[13.97, 2.54]],
|
||||
[[30.226, -2.54, 0, "-2p54header", 10, 1],
|
||||
[54.61, -2.54, 0, "-2p54header", 8, 1],
|
||||
|
|
@ -291,6 +317,6 @@ PERF74x51 = ["PERF74x51", "Perfboard 74 x 51mm", 74, 51, 1.0, 0, 3.0, 0, "sienna
|
|||
|
||||
PSU12V1A = ["PSU12V1A", "PSU 12V 1A", 67, 31, 1.7, 0, 3.9, 0, "green", true, [[3.5, 3.5], [-3.5, 3.5], [-3.5, -3.5], [3.5, -3.5]], [], []];
|
||||
|
||||
pcbs = [ExtruderPCB, PI_IO, RPI3, ArduinoUno3, Keyes5p1, PERF80x20, PERF70x50, PERF70x30, PERF60x40, PERF74x51, PSU12V1A, DuetE, Duex2, Duex5, Melzi, ZC_A0591];
|
||||
pcbs = [ExtruderPCB, PI_IO, RPI3, ArduinoUno3, ArduinoLeonardo, Keyes5p1, PERF80x20, PERF70x50, PERF70x30, PERF60x40, PERF74x51, PSU12V1A, DuetE, Duex2, Duex5, Melzi, ZC_A0591];
|
||||
|
||||
use <pcb.scad>
|
||||
|
|
|
|||
Loading…
Reference in New Issue