Added small geared stepper and driver board.

lib.scad

@@ -61,6 +61,7 @@ include <vitamins/light_strips.scad>
 include <vitamins/spools.scad>
 include <vitamins/mains_sockets.scad>
 include <vitamins/ldrs.scad>
+include <vitamins/geared_steppers.scad>
 
 use <vitamins/jack.scad>
 use <vitamins/meter.scad>

libtest.scad

@@ -34,6 +34,7 @@ use <tests/d_connectors.scad>
 use <tests/displays.scad>
 use <tests/fans.scad>
 use <tests/fuseholder.scad>
+use <tests/geared_steppers.scad>
 use <tests/hot_ends.scad>
 use <tests/iecs.scad>
 use <tests/inserts.scad>
@@ -300,6 +301,9 @@ steppers_y = batteries_y + 70;
 translate([x3, veroboard_y])
     veroboard_test();
 
+translate([x3 + 70, veroboard_y + 30])
+    geared_steppers();
+
 translate([x3, d_connectors_y])
     d_connectors();
 

readme.md

@@ -30,21 +30,22 @@ See [usage](docs/usage.md) for requirements, installation instructions and a usa
 <tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
 <tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
 <tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
-<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Psu_shroud">Psu_shroud</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
+<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Psu_shroud">Psu_shroud</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
-<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
+<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
-<tr><td> <a href = "#Iecs">Iecs</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
+<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
-<tr><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Iecs">Iecs</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Ssr_shroud">Ssr_shroud</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Ssr_shroud">Ssr_shroud</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Ldrs">Ldrs</a> </td><td> <a href = "#Ssrs">Ssrs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Ssrs">Ssrs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Ldrs">Ldrs</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Leds">Leds</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Leds">Leds</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Meter">Meter</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Meter">Meter</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Modules">Modules</a> </td><td></td><td></td><td></td><td></td></tr>
 <tr><td> <a href = "#Nuts">Nuts</a> </td><td></td><td></td><td></td><td></td></tr>
 </table>
 
@@ -684,6 +685,57 @@ Can draw three styles: solid, open frame and open frame with screw bosses.
 |   1 | ```fuseholder(6)``` |  Fuse holder 20mm |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Geared_steppers"></a>
+## Geared_steppers
+Geared tin can steppers
+
+
+[vitamins/geared_steppers.scad](vitamins/geared_steppers.scad) Object definitions.
+
+[vitamins/geared_stepper.scad](vitamins/geared_stepper.scad) Implementation.
+
+[tests/geared_steppers.scad](tests/geared_steppers.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| ```gs_boss_d(type)``` | Boss around the shaft diameter |
+| ```gs_boss_h(type)``` | Boss around the shaft height |
+| ```gs_bulge2_d(type)``` | Plastic rear bulge depth from centre |
+| ```gs_bulge2_h(type)``` | Plastic rear bulge height |
+| ```gs_bulge2_w(type)``` | Plastic rear bulge width |
+| ```gs_bulge_d(type)``` | Plastic bulge depth from centre |
+| ```gs_bulge_h(type)``` | Plastic bulge height |
+| ```gs_bulge_w(type)``` | Plastic bulge width |
+| ```gs_diameter(type)``` | Can diameter |
+| ```gs_flat_length(type)``` | Shaft flat length |
+| ```gs_height(type)``` | Can height |
+| ```gs_hole_d(type)``` | Screw hole diameter |
+| ```gs_lug_t(type)``` | Screw lug thickness |
+| ```gs_lug_w(type)``` | Screw lug width |
+| ```gs_offset(type)``` | Offset of the shaft from the centre of the can |
+| ```gs_pitch(type)``` | Screw pitch |
+| ```gs_shaft_d(type)``` | Shaft diameter |
+| ```gs_shaft_flat(type)``` | Shaft width across the flats |
+| ```gs_shaft_length(type)``` | Shaft length |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| ```geared_stepper(type)``` | Draw the specified geared stepper |
+| ```geared_stepper_screw_positions(type)``` | Place children at the screw positions |
+
+![geared_steppers](tests/png/geared_steppers.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | ```geared_stepper(28BYJ_48)``` |  Geared stepper - 28BYJ-48 5V |
+
+
 <a href="#top">Top</a>
 
 ---

tests/geared_steppers.scad

@@ -0,0 +1,27 @@
+//
+// NopSCADlib Copyright Chris Palmer 2019
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../vitamins/geared_steppers.scad>
+
+use <../utils/layout.scad>
+
+module geared_steppers()
+    layout([for(g = geared_steppers) gs_diameter(g)], 5)
+        geared_stepper(geared_steppers[$i]);
+
+geared_steppers();

vitamins/geared_stepper.scad

@@ -0,0 +1,114 @@
+//
+// NopSCADlib Copyright Chris Palmer 2019
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Geared tin can steppers
+//
+include <../core.scad>
+use <../utils/rounded_cylinder.scad>
+use <../utils/round.scad>
+
+function gs_diameter(type)     = type[2]; //! Can diameter
+function gs_height(type)       = type[3]; //! Can height
+function gs_pitch(type)        = type[4]; //! Screw pitch
+function gs_lug_w(type)        = type[5]; //! Screw lug width
+function gs_lug_t(type)        = type[6]; //! Screw lug thickness
+function gs_hole_d(type)       = type[7]; //! Screw hole diameter
+function gs_offset(type)       = type[8]; //! Offset of the shaft from the centre of the can
+function gs_boss_d(type)       = type[9]; //! Boss around the shaft diameter
+function gs_boss_h(type)       = type[10]; //! Boss around the shaft height
+function gs_shaft_d(type)      = type[11]; //! Shaft diameter
+function gs_shaft_flat(type)   = type[12]; //! Shaft width across the flats
+function gs_shaft_length(type) = type[13]; //! Shaft length
+function gs_flat_length(type)  = type[14]; //! Shaft flat length
+function gs_bulge_w(type)      = type[15]; //! Plastic bulge width
+function gs_bulge_d(type)      = type[16]; //! Plastic bulge depth from centre
+function gs_bulge_h(type)      = type[17]; //! Plastic bulge height
+function gs_bulge2_w(type)     = type[18]; //! Plastic rear bulge width
+function gs_bulge2_d(type)     = type[19]; //! Plastic rear bulge depth from centre
+function gs_bulge2_h(type)     = type[20]; //! Plastic rear bulge height
+
+module geared_stepper_screw_positions(type) //! Place children at the screw positions
+    for(side = [-1, 1])
+        translate([side * gs_pitch(type) / 2, -gs_offset(type)])
+            children();
+
+module geared_stepper(type) { //! Draw the specified geared stepper
+    vitamin(str("geared_stepper(", type[0], "): Geared stepper - ", type[1]));
+
+    radius = gs_diameter(type) / 2;
+    height = gs_height(type);
+    offset = gs_offset(type);
+    color("silver") {
+        translate([0, -offset])
+            rounded_cylinder(r = radius, h = height, r2 = 1);
+
+        cylinder(d = gs_boss_d(type), h = 2 * gs_boss_h(type), center = true);
+
+        linear_extrude(height = gs_lug_t(type))
+            difference() {
+                hull()
+                    geared_stepper_screw_positions(type)
+                        circle(d = gs_lug_w(type));
+
+                geared_stepper_screw_positions(type)
+                    circle(d = gs_hole_d(type));
+            }
+
+        translate([0, -offset - radius, eps])
+            cube([gs_bulge_w(type) - 2, 2 * (gs_bulge_d(type) - radius) - 2, 2 * eps], center = true);
+    }
+    vflip()
+        color(brass) {
+            d = gs_shaft_d(type);
+            h = gs_shaft_length(type);
+            linear_extrude(height = h)
+                intersection() {
+                    circle(d = d);
+
+                    square([d + 1, gs_shaft_flat(type)], center = true);
+                }
+
+            cylinder(d = d, h = h - gs_flat_length(type));
+        }
+
+    color("skyblue") {
+        h1 = gs_bulge_h(type);
+        translate([0, - offset - radius, eps])
+            rounded_rectangle([gs_bulge_w(type), 2 * (gs_bulge_d(type) - radius), h1], 0.5, center = false);
+
+        h2 = gs_bulge2_h(type);
+        translate([0, - offset, h1 + 1 - h2])
+            linear_extrude(height = h2)
+                round(0.5)
+                    intersection() {
+                        circle(gs_bulge2_d(type));
+
+                        translate([0, -50])
+                            square([gs_bulge2_w(type), 100], center = true);
+                    }
+    }
+
+    translate_z(2.5)
+        for(i = [0 : 4])
+            translate([i - 2.5, 0])
+                rotate([90, 0, 0])
+                    color(["yellow", "orange", "red", "pink", "blue"][i])
+                        cylinder(d = 1, h = radius + offset + 10);
+}

vitamins/geared_steppers.scad

@@ -0,0 +1,27 @@
+//
+// NopSCADlib Copyright Chris Palmer 2019
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Geared tin can steppers
+//
+28BYJ_48 = ["28BYJ_48", "28BYJ-48 5V", 28, 19, 35, 7, 0.85, 4.2, 8, 9, 1.5, 5, 3, 10, 6, 14.7, 17, 16.5, 17.7, 15.5, 13.8 ];
+
+geared_steppers = [28BYJ_48];
+
+use <geared_stepper.scad>

vitamins/pcbs.scad

@@ -275,6 +275,10 @@ PI_IO = ["PI_IO", "PI_IO V2",       35.56, 25.4, 1.6, 0,    0,   0, "green", tru
      [(3.4   - 2.7) * 25.4,          (4.5 - 4.15)  * 25.4,  0, "2p54socket", 13, 2, true],
     ], []];
 
+ZC_A0591 = ["ZC_A0591", "ZC-A0591 ULN2003 driver PCB", 35, 32, 1.6, 0, 2.5, 0, "green", false, [[2.25, 3.25], [-2.25, 3.25], [2.25, -3.25], [-2.25, -3.25] ],
+    [], [], [], [], M2p5_pan_screw];
+
+
 PERF80x20 = ["PERF80x20", "Perfboard 80 x 20mm", 80, 20, 1.6, 0, 2.3, 0, "green", true, [[2,2],[-2,2],[2,-2],[-2,-2]], [], [], [5.87, 3.49]];
 
 PERF70x50 = ["PERF70x50", "Perfboard 70 x 50mm", 70, 50, 1.6, 0, 2.3, 0, "green", true, [[2,2],[-2,2],[2,-2],[-2,-2]], [], [], [5.87, 3.49]];
@@ -287,6 +291,6 @@ PERF74x51 = ["PERF74x51", "Perfboard 74 x 51mm", 74, 51, 1.0, 0, 3.0, 0, "sienna
 
 PSU12V1A = ["PSU12V1A", "PSU 12V 1A", 67, 31, 1.7, 0, 3.9, 0, "green", true, [[3.5, 3.5], [-3.5, 3.5], [-3.5, -3.5], [3.5, -3.5]], [], []];
 
-pcbs = [ExtruderPCB, PI_IO, RPI3, ArduinoUno3, Keyes5p1, PERF80x20, PERF70x50, PERF70x30, PERF60x40, PERF74x51, PSU12V1A, DuetE, Duex2, Duex5, Melzi];
+pcbs = [ExtruderPCB, PI_IO, RPI3, ArduinoUno3, Keyes5p1, PERF80x20, PERF70x50, PERF70x30, PERF60x40, PERF74x51, PSU12V1A, DuetE, Duex2, Duex5, Melzi, ZC_A0591];
 
 use <pcb.scad>