diff --git a/libtest.png b/libtest.png
index 57d4bb8..cb4da30 100644
Binary files a/libtest.png and b/libtest.png differ
diff --git a/libtest.scad b/libtest.scad
index 2f18851..9739d86 100644
--- a/libtest.scad
+++ b/libtest.scad
@@ -136,13 +136,13 @@ translate([x5, cable_grommets_y + 250])
 translate([900, 600])
     box_test();
 
-translate([850, 1220])
+translate([850, 1260])
     bbox_test();
 
 x0 = 0;
 inserts_y = 0;
 nuts_y = inserts_y + 20;
-washers_y = nuts_y + 60;
+washers_y = nuts_y + 100;
 screws_y = washers_y + 120;
 o_rings_y = screws_y + 130;
 springs_y = o_rings_y + 20;
diff --git a/readme.md b/readme.md
index 8203b0a..380ebed 100644
--- a/readme.md
+++ b/readme.md
@@ -1623,11 +1623,16 @@ If a nut is given a child then it gets placed on its top surface.
 |   1 | ```nut(M2p5_nut)``` |  Nut M2.5 x 2.2mm  |
 |   1 | ```nut(M2p5_nut, nyloc = true)``` |  Nut M2.5 x 2.2mm nyloc |
 |   1 | ```nut(M2p5_nut, nylon = true)``` |  Nut M2.5 x 2.2mm nylon |
+|   1 | ```hammer_nut(M3_hammer_nut)``` |  Nut M3 hammer |
+|   1 | ```sliding_t_nut(M3_sliding_t_nut)``` |  Nut M3 sliding T |
 |   1 | ```nut(M3_nut)``` |  Nut M3 x 2.4mm  |
 |   1 | ```nut(M3_nut, brass = true)``` |  Nut M3 x 2.4mm brass |
 |   1 | ```nut(M3_nut, nyloc = true)``` |  Nut M3 x 2.4mm nyloc |
+|   1 | ```hammer_nut(M4_hammer_nut)``` |  Nut M4 hammer |
+|   1 | ```sliding_t_nut(M4_sliding_t_nut)``` |  Nut M4 sliding T |
 |   1 | ```nut(M4_nut)``` |  Nut M4 x 3.2mm  |
 |   1 | ```nut(M4_nut, nyloc = true)``` |  Nut M4 x 3.2mm nyloc |
+|   1 | ```sliding_t_nut(M5_sliding_t_nut)``` |  Nut M5 sliding T |
 |   1 | ```nut(M5_nut)``` |  Nut M5 x 4mm  |
 |   1 | ```nut(M5_nut, nyloc = true)``` |  Nut M5 x 4mm nyloc |
 |   1 | ```nut(M6_half_nut)``` |  Nut M6 x 3mm  |
diff --git a/tests/png/nuts.png b/tests/png/nuts.png
index e6881dc..b662be9 100644
Binary files a/tests/png/nuts.png and b/tests/png/nuts.png differ