mirror of
https://github.com/DJSundog/NopSCADlib.git
synced 2025-01-11 10:12:43 -05:00
Added image and updated readme.
This commit is contained in:
Chris Palmer
parent
171c9a6a34
commit
1a24e0d87e
145
readme.md
145
readme.md
@ -21,34 +21,34 @@ See [usage](docs/usage.md) for requirements, installation instructions and a usa
|
||||
<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#Bom">Bom</a> </td></tr>
|
||||
<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
|
||||
<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Global">Global</a> </td></tr>
|
||||
<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Pcbs">Pcbs</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
|
||||
<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
|
||||
<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Layout">Layout</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
|
||||
<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Psus">Psus</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Maths">Maths</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
|
||||
<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Pcb_mount">Pcb_mount</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Scs_bearing_blocks">Scs_bearing_blocks</a> </td><td> <a href = "#Psu_shroud">Psu_shroud</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Sk_brackets">Sk_brackets</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Iecs">Iecs</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Ssr_shroud">Ssr_shroud</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Springs">Springs</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Kp_pillow_blocks">Kp_pillow_blocks</a> </td><td> <a href = "#Ssrs">Ssrs</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Ldrs">Ldrs</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Leds">Leds</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Meter">Meter</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Modules">Modules</a> </td><td></td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Pcb">Pcb</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
|
||||
<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Pcbs">Pcbs</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
|
||||
<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Layout">Layout</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
|
||||
<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Maths">Maths</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
|
||||
<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Psus">Psus</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Pcb_mount">Pcb_mount</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Psu_shroud">Psu_shroud</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Scs_bearing_blocks">Scs_bearing_blocks</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Iecs">Iecs</a> </td><td> <a href = "#Sk_brackets">Sk_brackets</a> </td><td> <a href = "#Ssr_shroud">Ssr_shroud</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Spools">Spools</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Kp_pillow_blocks">Kp_pillow_blocks</a> </td><td> <a href = "#Springs">Springs</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Ldrs">Ldrs</a> </td><td> <a href = "#Ssrs">Ssrs</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Leds">Leds</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Meter">Meter</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
|
||||
</table>
|
||||
|
||||
---
|
||||
@ -1765,6 +1765,88 @@ A permanent magnet that can be magnatized and de-magnatized electronically.
|
||||
| 1 | ```opengrab()``` | OpenGrab V3 electro permanent magnet |
|
||||
|
||||
|
||||
<a href="#top">Top</a>
|
||||
|
||||
---
|
||||
<a name="Pcb"></a>
|
||||
## Pcb
|
||||
PCBs and perfboard with optional components. The shape can be a rectangle with optionally rounded corners or a polygon for odd shapes like Arduino.
|
||||
|
||||
|
||||
[vitamins/pcb.scad](vitamins/pcb.scad) Implementation.
|
||||
|
||||
[tests/pcb.scad](tests/pcb.scad) Code for this example.
|
||||
|
||||
### Properties
|
||||
| Function | Description |
|
||||
|:--- |:--- |
|
||||
| ```hdmi_depth(type)``` | Front to back depth |
|
||||
| ```hdmi_height(type)``` | Outside height above the PCB |
|
||||
| ```hdmi_height1(type)``` | Inside height at the sides |
|
||||
| ```hdmi_height2(type)``` | Inside height in the middle |
|
||||
| ```hdmi_thickness(type)``` | Wall thickness of the metal |
|
||||
| ```hdmi_width1(type)``` | Inside width at the top |
|
||||
| ```hdmi_width2(type)``` | Inside width at the bottom |
|
||||
| ```pcb_accessories(type)``` | List of accessories to go on the BOM, SD cards, USB cables, etc. |
|
||||
| ```pcb_colour(type)``` | Colour of the subtrate |
|
||||
| ```pcb_components(type)``` | List of components |
|
||||
| ```pcb_grid(type)``` | Grid if a perfboard |
|
||||
| ```pcb_hole_d(type)``` | Mounting hole diameter |
|
||||
| ```pcb_holes(type)``` | List of hole positions |
|
||||
| ```pcb_land_d(type)``` | Pad around mounting hole |
|
||||
| ```pcb_length(type)``` | Length |
|
||||
| ```pcb_name(type)``` | Description |
|
||||
| ```pcb_parts_on_bom(type)``` | True if the parts should be separate BOM items |
|
||||
| ```pcb_polygon(type)``` | Optional outline polygon for odd shaped boards |
|
||||
| ```pcb_radius(type)``` | Corner radius |
|
||||
| ```pcb_thickness(type)``` | Thickness |
|
||||
| ```pcb_width(type)``` | Width |
|
||||
|
||||
### Functions
|
||||
| Function | Description |
|
||||
|:--- |:--- |
|
||||
| ```pcb_component_position(type, name, index = 0)``` | Return x y position of specified component |
|
||||
| ```pcb_coord(type, p)``` | Convert offsets from the edge to coordinates relative to the centre |
|
||||
| ```pcb_grid_pos(type, x, y, z = 0)``` | Returns a pcb grid position |
|
||||
| ```pcb_screw(type, cap = hs_cap)``` | Mounting screw type |
|
||||
|
||||
### Modules
|
||||
| Module | Description |
|
||||
|:--- |:--- |
|
||||
| ```barrel_jack(cutout = false)``` | Draw barrel power jack |
|
||||
| ```buzzer(height, diameter, colour)``` | Draw PCB buzzer with specified height, diameter and color |
|
||||
| ```chip(length, width, thickness, colour, cutout = false)``` | Draw a coloured cube to represent a chip, or other rectangular component |
|
||||
| ```flat_flex(cutout = false)``` | Draw flat flexistrip connector as used on RPI0 |
|
||||
| ```flex(cutout = false)``` | Draw flexistrip connector |
|
||||
| ```hdmi(type, cutout = false)``` | Draw HDMI socket |
|
||||
| ```jack(cutout = false)``` | Draw 3.5mm jack |
|
||||
| ```molex_254(ways)``` | Draw molex header |
|
||||
| ```pcb(type)``` | Draw specified PCB |
|
||||
| ```pcb_assembly(type, height, thickness)``` | Draw PCB assembly with spaces and fasteners in place |
|
||||
| ```pcb_base(type, height, thickness, wall = 2)``` | Generate STL for a base with PCB spacers |
|
||||
| ```pcb_component(comp, cutouts = false, angle = undef)``` | Draw pcb component from description |
|
||||
| ```pcb_component_position(type, name)``` | Position child at the specified component position |
|
||||
| ```pcb_components(type, cutouts = false, angle = undef)``` | Draw list of PCB components on the PCB |
|
||||
| ```pcb_cutouts(type, angle = undef)``` | Make cut outs to clear components on a PCB |
|
||||
| ```pcb_grid(type, x, y, z = 0)``` | Positions children at specified grid position |
|
||||
| ```pcb_screw_positions(type)``` | Positions children at the mounting hole positions |
|
||||
| ```pcb_spacer(screw, height, wall = 1.8, taper = 0)``` | Generate STL for PCB spacer |
|
||||
| ```rj45(cutout = false)``` | Draw RJ45 Ethernet connector |
|
||||
| ```terminal_35(ways, colour = "blue")``` | Draw 3.5mm terminal block |
|
||||
| ```uSD(size, cutout = false)``` | Draw uSD socket |
|
||||
| ```usb_Ax1(cutout = false)``` | Draw USB type A single socket |
|
||||
| ```usb_Ax2(cutout = false)``` | Draw USB type A dual socket |
|
||||
| ```usb_B(cutout = false)``` | Draw USB B connector |
|
||||
| ```usb_uA(cutout = false)``` | Draw USB micro A connector |
|
||||
|
||||
|
||||
|
||||
### Vitamins
|
||||
| Qty | Module call | BOM entry |
|
||||
| ---:|:--- |:---|
|
||||
| 1 | ```pcb(TestPCB)``` | Test PCB |
|
||||
|
||||
|
||||
<a href="#top">Top</a>
|
||||
|
||||
---
|
||||
@ -1834,8 +1916,9 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
|
||||
| ```pcb_screw_positions(type)``` | Positions children at the mounting hole positions |
|
||||
| ```pcb_spacer(screw, height, wall = 1.8, taper = 0)``` | Generate STL for PCB spacer |
|
||||
| ```rj45(cutout = false)``` | Draw RJ45 Ethernet connector |
|
||||
| ```terminal_35(ways)``` | Draw 3.5mm terminal block |
|
||||
| ```terminal_35(ways, colour = "blue")``` | Draw 3.5mm terminal block |
|
||||
| ```uSD(size, cutout = false)``` | Draw uSD socket |
|
||||
| ```usb_Ax1(cutout = false)``` | Draw USB type A single socket |
|
||||
| ```usb_Ax2(cutout = false)``` | Draw USB type A dual socket |
|
||||
| ```usb_B(cutout = false)``` | Draw USB B connector |
|
||||
| ```usb_uA(cutout = false)``` | Draw USB micro A connector |
|
||||
@ -1997,8 +2080,8 @@ Pin headers and sockets, etc.
|
||||
| ```idc_transition(type, cols = 5, skip = [], cutout = false)``` | Draw IDC transition header |
|
||||
| ```jst_xh_header(type, pin_count, right_angle=false, colour, pin_colour)``` | Draw JST XH connector |
|
||||
| ```pin(type, length = undef)``` | Draw a header pin |
|
||||
| ```pin_header(type, cols = 1, rows = 1, smt = false, right_angle = false, cutout = false)``` | Draw pin header |
|
||||
| ```pin_socket(type, cols = 1, rows = 1, right_angle = false, height = 0, smt = false, cutout = false)``` | Draw pin socket |
|
||||
| ```pin_header(type, cols = 1, rows = 1, smt = false, right_angle = false, cutout = false, colour)``` | Draw pin header |
|
||||
| ```pin_socket(type, cols = 1, rows = 1, right_angle = false, height = 0, smt = false, cutout = false, colour)``` | Draw pin socket |
|
||||
|
||||
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
//
|
||||
// NopSCADlib Copyright Chris Palmer 2018
|
||||
// NopSCADlib Copyright Chris Palmer 2020
|
||||
// nop.head@gmail.com
|
||||
// hydraraptor.blogspot.com
|
||||
//
|
||||
@ -107,4 +107,3 @@ test_pcb = ["TestPCB", "Test PCB",
|
||||
if($preview)
|
||||
let($show_threads = true)
|
||||
pcb(test_pcb);
|
||||
|
||||
|
||||
BIN
tests/png/pcb.png
Normal file
BIN
tests/png/pcb.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 89 KiB |
Loading…
x
Reference in New Issue
Block a user