djsundog/NopSCADlib
1
0
Fork 0
mirror of https://github.com/DJSundog/NopSCADlib.git synced 2024-12-02 11:40:02 -05:00
Code Issues Projects Releases Wiki Activity
af4c5e2b3e
NopSCADlib/vitamins/pcbs.scad

293 lines
21 KiB
OpenSCAD
Raw Normal View History

Added source code
2019-06-08 17:10:47 -04:00
//
// NopSCADlib Copyright Chris Palmer 2018
// nop.head@gmail.com
// hydraraptor.blogspot.com
//
// This file is part of NopSCADlib.
//
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
// GNU General Public License as published by the Free Software Foundation, either version 3 of
// the License, or (at your option) any later version.
//
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
// See the GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License along with NopSCADlib.
// If not, see <https://www.gnu.org/licenses/>.
//
include <screws.scad>
//
// l w t r h l c b h
// e i h a o a o o o
// n d i d l n l m l
// g t c i e d o e
// t h k u u s
// h n s d d r
// e
// s
// s
//
Added Duet Ethernet and Duex PCB models. Made green terminals parametric. Separated pin_headers and green_terminals out from pcb.scad.
2019-07-04 07:03:38 -04:00
Ethernet = ["Ethernet", "Duet Ethernet piggy back",
33.8, 37.5, 1.6, 0, 2.54, 0, "#1D39AB", false, [[27.1, -6.3], [7.5, -2.7], [21.3, -31.1]],
[[10.7, -13.1, 180, "rj45"],
[7.75, -36.2, 0, "-2p54header", 6, 1],
[7.75, -26.04, 0, "-2p54header", 6, 1],
[27.1, -6.3, 0, "-standoff", 5, 4.5, 12.5, 2.54],
[7.5, -2.70, 0, "-standoff", 5, 4.5, 12.5, 2.54],
[21.3, -31.1, 0, "-standoff", 5, 4.5, 12.5, 2.54],
],
[]];
DuetE = ["DuetE", "Duet 2 Ethernet electronics",
123, 100, 1.6, 0, 4.2, 0, "#2140BE", false, [[-4, 4], [-4, -4], [4, -4],[4, 4]],
[[ 18.5, -69.15, 0, "pcb", 5, Ethernet],
[ 42.9, -3.2, 90, "molex_hdr", 4],
[ 59.8, -3.2, 90, "molex_hdr", 4],
[ 76.2, -3.2, 90, "molex_hdr", 4],
[ 92.6, -3.2, 90, "molex_hdr", 4],
[109.9, -3.2, 90, "molex_hdr", 4],
[109.9, -9.6, 90, "molex_hdr", 4],
[119.7, -31, 0, "molex_hdr", 3],
[119.7, -88.6, 0, "molex_hdr", 2],
[114.9, -75.1, 0, "gterm635", 2],
[114.9, -43.5, 0, "gterm635", 2],
[ 39, -97, -90, "molex_hdr", 4],
[ 27.9, -97, -90, "molex_hdr", 4],
[ 83.7, -38.7, -90, "molex_hdr", 3],
[ 74.3, -40.7, -90, "molex_hdr", 3],
[ 64.0, -40.7, -90, "molex_hdr", 3],
[ 54.0, -40.7, -90, "molex_hdr", 3],
[ 44.1, -40.7, -90, "molex_hdr", 3],
[ 35.0, -40.7, -90, "molex_hdr", 2],
[ 28.9, -40.7, -90, "molex_hdr", 2],
[103.0, -48.8, -90, "molex_hdr", 2],
[ 97.0, -48.8, -90, "molex_hdr", 2],
[ 90.3, -48.8, -90, "molex_hdr", 2],
[ 84.1, -48.8, -90, "molex_hdr", 2],
[ 77.9, -48.8, -90, "molex_hdr", 2],
[105.2, -54.9, 0, "2p54header", 2, 1],
[ 98.4, -54.9, 0, "2p54header", 2, 1],
[ 90.2, -54.9, 0, "2p54header", 3, 1],
[ 61.7, -83.1, 0, "2p54header", 5, 2],
[ 29.5, -3.6, 90, "gterm35", 4],
[ 45.0, -70.8, 45, "chip", 19, 19, 1.5],
[ 34.6, -18.8, 0, "chip", 10, 10, 2],
[ 53.2, -18.8, 0, "chip", 10, 10, 2],
[ 71.8, -18.8, 0, "chip", 10, 10, 2],
[ 90.4, -18.8, 0, "chip", 10, 10, 2],
[109.9, -22.0, 0, "chip", 10, 10, 2],
[105.8, -86.3, 0, "2p54boxhdr", 5, 2],
[ 85.2, -86.3, 0, "2p54boxhdr", 5, 2],
[ 79.9, -95.7, 180, "2p54boxhdr", 25, 2],
[ 2.0, -47.3, 180, "usb_uA"],
[ 8.4, -63.3, 180, "uSD", [15, 14.5, 2]],
[ 2.2, -9.7, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // E1 heater
[ 2.2, -13.2, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // E0 heater
[ 2.2, -16.7, 0, "chip", inch(0.03), inch(0.06), 1, "blue"], // Vin
[ 2.2, -20.2, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // 5V
[ 2.2, -24.0, 0, "chip", inch(0.03), inch(0.06), 1, "green"], // 3.3V
[ 1.8, -41.8, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // USB
[ 2.3, -53.5, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // Diag
[ 49.8, -2.0, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // E1 stop
[ 52.9, -2.0, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // E0 stop
[ 68.8, -2.4, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // X stop
[ 85.4, -2.4, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // Y stop
[101.6, -1.8, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // Z stop
[109.8, -58.8, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // Bed heater
[ 2.3, -37.2, 0, "chip", 3.6, 4.8, 2.0, "silver"], // Reset switch
[ 0.0, -37.2, 0, "chip", 2.0, 2.6, 1.4, grey20], // Reset button
],
[": Micro SD card", ": Cat 5 patch cable 300mm"]];
Duex2 = ["Duex2", "Duex2 expansion board",
123, 100, 1.6, 0, 4.2, 0, "#2140BE", false, [[-4, 4], [-4, -4], [4, -4],[4, 4]],
[ [ 79.8, -4.3, 180, "2p54boxhdr", 25, 2],
[ 27.8, -3.0, 0, "2p54header", 10, 1],
[ 45.7, -14.7, 0, "2p54header", 3, 1], // Endstop voltage select
[ 34.8, -15.1, 0, "2p54header", 3, 2], // Fan voltage select
[ 4.8, -55.2, 90, "2p54header", 1, 2], // 12V EN
[ 59.5, -30.3, 0, "2p54header", 3, 1], // 5V Aux select
[ 31.6, -41.4, 0, "2p54header", 2, 5], // SPIO
[ 4.7, -11.8, -90, "molex_hdr", 2], // Fan / LED 8
[ 4.9, -23.9, -90, "molex_hdr", 2], // Fan / LED 7
[ 12.0, -23.9, -90, "molex_hdr", 2], // Fan / LED 6
[ 19.7, -23.9, -90, "molex_hdr", 2], // Fan / LED 5
[ 27.3, -23.9, -90, "molex_hdr", 2], // Fan / LED 4
[ 34.9, -23.9, -90, "molex_hdr", 2], // Fan / LED 3
[ 44.3, -23.9, -90, "molex_hdr", 3], // E6 stop
[ 54.5, -23.9, -90, "molex_hdr", 3], // E5 stop
[ 64.6, -23.9, -90, "molex_hdr", 3], // E4 stop
[ 74.8, -23.9, -90, "molex_hdr", 3], // E3 stop
[ 84.9, -23.9, -90, "molex_hdr", 3], // E2 stop
[ 57.0, -46.8, -90, "molex_hdr", 2], // E6 temp
[ 64.6, -46.8, -90, "molex_hdr", 2], // E5 temp
[ 57.0, -36.6, -90, "molex_hdr", 2], // E4 temp
[ 64.6, -36.6, -90, "molex_hdr", 2], // E3 temp
[ 72.2, -36.6, -90, "molex_hdr", 2], // E2 temp
[ 26.5, -58.2, -90, "molex_hdr", 3], // PWM_5
[ 36.7, -58.2, -90, "molex_hdr", 3], // PWM_4
[ 46.8, -58.2, -90, "molex_hdr", 3], // PWM_3
[ 57.0, -58.2, -90, "molex_hdr", 3], // PWM_2
[ 67.2, -58.2, -90, "molex_hdr", 3], // PWM_1
[ 83.2, -18.3, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // E2 stop
[ 74.5, -18.3, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // E3 stop
[ 63.8, -18.7, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // E4 stop
[ 54.7, -18.3, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // E5 stop
[ 44.3, -18.4, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // E6 stop
[112.4, -15.5, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // E2 heat
[112.4, -22.9, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // E3 heat
[112.4, -29.1, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // E4 heat
[112.4, -36.1, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // E5 heat
[112.4, -43.4, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // E6 heat
[118.6, -30.3, 0, "gterm35", 10], // Heaters
[114.9, -56.5, 0, "gterm635", 2], // VIN
[119.6, -69.0, 0, "molex_hdr", 2], // 5V AUX in
[ 4.5, -49.4, 90, "molex_hdr", 2], // 12V
[110.7, -81.2, 0, "chip", 10, 10, 2],
[ 86.1, -81.2, 0, "chip", 10, 10, 2],
[109.9, -96.8, -90, "molex_hdr", 4],
[ 86.1, -96.8, -90, "molex_hdr", 4],
],
[]];
Duex5 = ["Duex5", "Duex5 expasnion board",
123, 100, 1.6, 0, 4.2, 0, "#2140BE", false, [[-4, 4], [-4, -4], [4, -4],[4, 4]],
concat(Duex2[11], [
[ 61.5, -81.2, 0, "chip", 10, 10, 2],
[ 36.9, -81.2, 0, "chip", 10, 10, 2],
[ 12.3, -81.2, 0, "chip", 10, 10, 2],
[ 61.5, -96.4, -90, "molex_hdr", 4],
[ 36.9, -96.4, -90, "molex_hdr", 4],
[ 14.3, -96.4, -90, "molex_hdr", 4],
]),
Added source code
2019-06-08 17:10:47 -04:00
[]];
Added Duet Ethernet and Duex PCB models. Made green terminals parametric. Separated pin_headers and green_terminals out from pcb.scad.
2019-07-04 07:03:38 -04:00
Added source code
2019-06-08 17:10:47 -04:00
Melzi = ["Melzi", "Melzi electronics", 203.2, 49.53, 1.6, 3.81, 3.1, 6, "green", false, [[3.81, 3.81], [-3.81, 3.81], [-3.81, -3.81], [3.81, -3.81]],
[],
[": USB A to Mini B lead", ": Micro SD card"]];
RPI3 = ["RPI3", "Raspberry Pi 3", 85, 56, 1.4, 3, 2.75, 6, "green", false, [[3.5, 3.5], [61.5, 3.5], [61.5, -3.5], [3.5, -3.5]],
[[32.5, -3.5, 0, "2p54header", 20, 2],
[27, -24.6, 0, "chip", 14, 14, 1],
[60, -22.3, 0, "chip", 9, 9, 0.6],
[-8.5, 10.25, 0, "rj45"],
[-6.5, 29, 0, "usb_Ax2"],
[-6.5, 47, 0, "usb_Ax2"],
[53.5, 6, -90, "jack"],
[32, 4.4, -90, "hdmi"],
[10.6, 2, -90, "usb_uA"],
[3.6, 28, 90, "flex"],
[45, 11.5,-90, "flex"],
Added Duet Ethernet and Duex PCB models. Made green terminals parametric. Separated pin_headers and green_terminals out from pcb.scad.
2019-07-04 07:03:38 -04:00
[7.75, 28, 180, "-uSD", [12, 11.5, 1.28]],
Added source code
2019-06-08 17:10:47 -04:00
],
[": Micro SD card"]];
Added Duet Ethernet and Duex PCB models. Made green terminals parametric. Separated pin_headers and green_terminals out from pcb.scad.
2019-07-04 07:03:38 -04:00
ArduinoUno3 = ["ArduinoUno3", "Arduino Uno R3", 68.58, 53.34, 1.6, 0, 3.3, 0, "#2140BE", false, [[15.24, 50.8],[66.04, 35.56],[66.04, 7.62],[13.97, 2.54]],
Added source code
2019-06-08 17:10:47 -04:00
[[30.226, -2.54, 0, "2p54socket", 10, 1],
[54.61, -2.54, 0, "2p54socket", 8, 1],
[36.83, 2.54, 0, "2p54socket", 8, 1],
[57.15, 2.54, 0, "2p54socket", 6, 1],
[64.91, 27.89, 0, "2p54header", 2, 3],
[18.796, -7.00, 0, "2p54header", 3, 2],
[ 6.5, -3.5, 0, "button_6mm"],
[4.7625, 7.62, 180, "barrel_jack"],
[1.5875, 37.7825,180,"usb_B"],
],
[],[],
inch([
[-1.35, -1.05],
[-1.35, 1.05],
[ 1.19, 1.05],
[ 1.25, 0.99],
[ 1.25, 0.54],
[ 1.35, 0.44],
[ 1.35, -0.85],
[ 1.25, -0.95],
[ 1.25, -1.05],
]),
M2p5_pan_screw
];
Added Duet Ethernet and Duex PCB models. Made green terminals parametric. Separated pin_headers and green_terminals out from pcb.scad.
2019-07-04 07:03:38 -04:00
Keyes5p1 = ["Keyes5p1", "Keyes5.1 Arduino Uno expansion board", 68.58, 53.34, 1.6, 0, 3.3, 0, "#2140BE", false, [[15.24, 50.8],[66.04, 35.56],[66.04, 7.62],[13.97, 2.54]],
Added source code
2019-06-08 17:10:47 -04:00
[[30.226, -2.54, 0, "-2p54header", 10, 1],
[54.61, -2.54, 0, "-2p54header", 8, 1],
[36.83, 2.54, 0, "-2p54header", 8, 1],
[57.15, 2.54, 0, "-2p54header", 6, 1],
],
[],[],
inch([
[-1.35, -1.05],
[-1.35, 1.05],
[ 1.19, 1.05],
[ 1.25, 0.99],
[ 1.25, 0.54],
[ 1.35, 0.44],
[ 1.35, -0.85],
[ 1.25, -0.95],
[ 1.25, -1.05],
]),
M2p5_pan_screw
];
ExtruderPCB = ["ExtruderPCB", "Extruder connection PCB",
33.02, 24.13, 1.6, 0, 0, 0, "green", true, [],
[[3 * 1.27, 24.13 / 2, 90, "D_plug", DCONN15],
[-(8.89 + 2.75 * 2.54), 2.5 * 1.27 + 24.13 / 2, 90, "molex_hdr", 3],
[-(8.89 - 1.5 * 2.54), -3.5 * 1.27 + 24.13 / 2, -90, "molex_hdr", 2],
[-(8.89 - 2.54), 2.5 * 1.27 + 24.13 / 2, 90, "term254", 4],
[-(8.89 + 2 * 2.54), -3.5 * 1.27 + 24.13 / 2, -90, "term254", 4],
], []];
PI_IO = ["PI_IO", "PI_IO V2", 35.56, 25.4, 1.6, 0, 0, 0, "green", true, [],
[[(3.015 - 2.7) * 25.4 - 3.5 /2, (4.5 - 3.685) * 25.4, 90, "term35", 2],
[(3.46 - 2.7) * 25.4 - 3.5 /2, (4.5 - 3.69) * 25.4, 90, "term35", 2],
[(3.91 - 2.7) * 25.4 - 3.5 /2, (4.5 - 3.69) * 25.4, 90, "term35", 2],
[(3.4 - 2.7) * 25.4, (4.5 - 4.15) * 25.4, 0, "2p54socket", 13, 2, true],
], []];
PERF80x20 = ["PERF80x20", "Perfboard 80 x 20mm", 80, 20, 1.6, 0, 2.3, 0, "green", true, [[2,2],[-2,2],[2,-2],[-2,-2]], [], [], [5.87, 3.49]];
PERF70x50 = ["PERF70x50", "Perfboard 70 x 50mm", 70, 50, 1.6, 0, 2.3, 0, "green", true, [[2,2],[-2,2],[2,-2],[-2,-2]], [], [], [5.87, 3.49]];
PERF70x30 = ["PERF70x30", "Perfboard 70 x 30mm", 70, 30, 1.6, 0, 2.3, 0, "green", true, [[2,2],[-2,2],[2,-2],[-2,-2]], [], [], [5.87, 3.49]];
PERF60x40 = ["PERF60x40", "Perfboard 60 x 40mm", 60, 40, 1.6, 0, 2.3, 0, "green", true, [[2,2],[-2,2],[2,-2],[-2,-2]], [], [], [5.87, 3.49]];
PERF74x51 = ["PERF74x51", "Perfboard 74 x 51mm", 74, 51, 1.0, 0, 3.0, 0, "sienna", true, [[3.0, 3.5], [-3.0, 3.5], [3.0, -3.5], [-3.0, -3.5]], [], [], [9.5, 4.5]];
PSU12V1A = ["PSU12V1A", "PSU 12V 1A", 67, 31, 1.7, 0, 3.9, 0, "green", true, [[3.5, 3.5], [-3.5, 3.5], [-3.5, -3.5], [3.5, -3.5]], [], []];
Added Duet Ethernet and Duex PCB models. Made green terminals parametric. Separated pin_headers and green_terminals out from pcb.scad.
2019-07-04 07:03:38 -04:00
pcbs = [ExtruderPCB, PI_IO, RPI3, ArduinoUno3, Keyes5p1, PERF80x20, PERF70x50, PERF70x30, PERF60x40, PERF74x51, PSU12V1A, DuetE, Duex2, Duex5, Melzi];
Added source code
2019-06-08 17:10:47 -04:00
use <pcb.scad>
Reference in New Issue Copy Permalink