NopSCADlib/vitamins/green_terminal.scad

181 lines
7.7 KiB
OpenSCAD
Raw Normal View History

//
// NopSCADlib Copyright Chris Palmer 2018
// nop.head@gmail.com
// hydraraptor.blogspot.com
//
// This file is part of NopSCADlib.
//
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
// GNU General Public License as published by the Free Software Foundation, either version 3 of
// the License, or (at your option) any later version.
//
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
// See the GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License along with NopSCADlib.
// If not, see <https://www.gnu.org/licenses/>.
//
//
//! Parametric green terminal blocks
//
include <../utils/core/core.scad>
use <../utils/tube.scad>
function gt_pitch(type) = type[1]; //! Pitch between terminals
function gt_depth(type) = type[2]; //! Total front to back depth
function gt_height(type) = type[3]; //! Height of the flat top
function gt_top(type) = type[4]; //! Depth at the top
function gt_front_height(type) = type[5]; //! Height at the front
function gt_front_depth(type) = type[6]; //! Front ledge depth
function gt_back_height(type) = type[7]; //! Height at the back
function gt_back_depth(type) = type[8]; //! Back ledge depth
function gt_screw_r(type) = type[9]; //! Screw head radius
function gt_front_t(type) = type[10]; //! Thickness of frame around the front aperture
function gt_box_w(type) = type[11]; //! Width inside the cable entry box
function gt_box_h(type) = type[12]; //! Height of the cable entry box
function gt_box_setback(type) = type[13]; //! How far the contact box is set back from the front
function gt_y_offset(type) = type[14]; //! Offset of the pins from centre of the depth
function gt_y_offset2(type) = type[15]; //! Offset of the pins from the screws
function gt_tube_h(type) = type[16]; //! Height of optional tubes around the screws
module green_terminal(type, ways, skip = [], colour = "lime") { //! Draw green terminal blocks, skip can be used to remove pins.
pitch = gt_pitch(type);
imperial = str(pitch / inch(1));
vitamin(str("green_terminal(", type[0], ", ", ways, "): Terminal block ", ways, " way ", len(imperial) < 5 ? str(pitch / inch(1), "\"") : str(pitch, "mm")));
width = ways * pitch;
depth = gt_depth(type);
height = gt_height(type);
ledge_height = gt_front_height(type);
ledge_depth = gt_front_depth(type);
top = gt_top(type);
back = gt_back_height(type);
back_ledge = gt_back_depth(type);
tube_h = gt_tube_h(type);
module single(skip = false) {
screw_r = gt_screw_r(type);
box_w1 = pitch - 2 * gt_front_t(type);
box_h1 = ledge_height - 2 * gt_front_t(type);
box_w2 = gt_box_w(type);
box_h2 = gt_box_h(type);
y = gt_y_offset(type);
y2 = gt_y_offset2(type);
box_front = y + depth / 2 - gt_box_setback(type);
box_back = y - depth / 2 + 1;
module horizontal_section()
difference() {
translate([y, 0])
square([depth, pitch], center = true);
translate([y + 1, 0])
square([depth, box_w2], center = true);
translate([y + depth / 2, 0])
hull() {
square([1, box_w1], center = true);
square([4, box_w2], center = true);
}
}
color(colour) {
rotate([90, 0, 0])
linear_extrude(pitch, center = true, convexity = 5)
polygon(points = [ // Vertical section
[y + depth / 2, 0],
[y + depth / 2, ledge_height / 2 - box_h1 / 2],
[y + depth / 2 - 0.5, ledge_height / 2 - box_h1 / 2],
[box_front, ledge_height / 2 - box_h2 / 2],
[box_back, ledge_height / 2 - box_h2 / 2],
[box_back, ledge_height / 2 + box_h2 / 2],
[box_front, ledge_height / 2 + box_h2 / 2],
[y + depth / 2 - 0.5, ledge_height / 2 + box_h1 / 2],
[y + depth / 2, ledge_height / 2 + box_h1 / 2],
[y + depth / 2, ledge_height],
[y + depth / 2 - ledge_depth, ledge_height],
[y2 + top / 2, height],
[y2 + screw_r + eps, height],
[y2 + screw_r + eps, ledge_height / 2 + box_h2 / 2],
[y2 - screw_r - eps, ledge_height / 2 + box_h2 / 2],
[y2 - screw_r - eps, height],
[y2 -top / 2, height],
[y - depth / 2 + back_ledge, back],
[y - depth / 2, back],
[y - depth / 2, 0],
]);
translate([y2, 0, ledge_height / 2 + box_h2 / 2]) // Screw socket
linear_extrude(height - ledge_height / 2 - box_h2 / 2)
difference() {
square([screw_r * 2 + 0.1, pitch], center = true);
circle(screw_r);
}
linear_extrude(ledge_height)
intersection() {
horizontal_section();
translate([0, -5])
square([10, 10]);
}
linear_extrude(back)
intersection() {
horizontal_section();
translate([-10, -5])
square([10, 10]);
}
if(tube_h)
translate([y2, 0, height])
linear_extrude(tube_h - height)
intersection() {
ring(or = top / 2, ir = screw_r);
square([10, pitch], center = true);
}
}
if(!skip)
color("silver") {
2020-04-08 14:15:38 -04:00
slot_depth = 1;
screw_top = height - 0.5;
pin_l = 3.3;
translate([y2, 0]) {
translate_z(screw_top - 2 * slot_depth) // screw head
cylinder(r = screw_r, h = slot_depth);
translate_z(screw_top - slot_depth) // screw head
linear_extrude(slot_depth)
difference() {
circle(screw_r);
square([10, screw_r / 4], center = true);
}
}
translate([box_back, 0, ledge_height / 2]) {
rotate([0, 90, 0])
linear_extrude(box_front - box_back)
difference() {
square([box_h2, box_w2], center = true);
2020-04-08 14:15:38 -04:00
square([box_h2 - 0.1, box_w2 - 0.1], center = true);
2020-04-08 14:15:38 -04:00
}
2020-04-08 14:15:38 -04:00
cube([1, box_w2, box_h2], center = true); // terminal back
}
2020-04-08 14:15:38 -04:00
translate_z(-pin_l / 2)
cube([0.44, 0.75, pin_l], center = true); // pin
}
}
for(i = [0: ways - 1])
translate([0, i * pitch - width / 2 + pitch / 2])
single(in(skip, i));
}