NopSCADlib/vitamins/circlip.scad

91 lines
3.3 KiB
OpenSCAD
Raw Normal View History

2020-03-24 13:22:32 -04:00
//
// NopSCADlib Copyright Chris Palmer 2020
// nop.head@gmail.com
// hydraraptor.blogspot.com
//
// This file is part of NopSCADlib.
//
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
// GNU General Public License as published by the Free Software Foundation, either version 3 of
// the License, or (at your option) any later version.
//
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
// See the GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License along with NopSCADlib.
// If not, see <https://www.gnu.org/licenses/>.
//
//
//! Circlips aka tapered retaining rings.
//
include <../utils/core/core.scad>
include <../utils/sector.scad>
include <../utils/round.scad>
include <../utils/maths.scad>
function circlip_d1(type) = type[1]; //! Nominal OD, i.e. diameter of tube
function circlip_d2(type) = type[2]; //! Groove diameter, i.e. OD when installed
function circlip_d3(type) = type[3]; //! Relaxed OD when not installed
function circlip_thickness(type) = type[4]; //! Thickness
function circlip_a(type) = type[5]; //! Size of the lugs
function circlip_b(type) = type[6]; //! Widest part of the taper
function circlip_d5(type) = type[7]; //! Plier hole diameter
circlip_colour = grey(20);
2020-03-24 13:22:32 -04:00
closed_angle = 25;
module internal_circlip(type, open = 0) { //! Draw specified internal circlip, open = 0, for nominal size installed, 1 for relaxed uninstalled, -1 for squeezed to install
d1 = circlip_d1(type);
vitamin(str("circlip(", type[0], "): Circlip internal ", d1, "mm"));
d3 = circlip_d3(type);
d2 = circlip_d2(type);
a = circlip_a(type);
b = circlip_b(type);
d5 = circlip_d5(type);
od = lookup(open, [[-1, d1], [0, d2], [1, d3]]);
or = od / 2;
c = (d3 - d1);
angle = (od - d1) / d1 * 360 + closed_angle;
tab_angle = 360 * a / PI / od;
p = [0, -or + b / 2, 1] * rot3_z(angle / 2 + tab_angle);
pitch = (or - a / 2);
y_offset = (sqr(p.x) + sqr(p.y) - sqr(or - b)) / (or - b - p.y) / 2;
ir = or - b + y_offset;
color(circlip_colour)
linear_extrude(circlip_thickness(type), center = true)
2020-03-24 13:22:32 -04:00
round((a - d5) / 5)
union() {
difference() {
circle(or);
translate([0, -y_offset])
circle(ir);
sector(d3 / 2 + 1, 270 - angle / 2 - tab_angle, 270 + angle / 2 + tab_angle);
}
for(side = [-1, 1])
intersection() {
circle(or);
rotate(side * (angle + tab_angle) / 2)
difference() {
hull() {
translate([0, -pitch])
circle(d = a);
translate([0, -pitch - a])
circle(d = 1.5 * a);
}
translate([0, -pitch])
circle(d = d5);
}
}
}
}