NopSCADlib/global_defs.scad

93 lines
3.8 KiB
OpenSCAD
Raw Normal View History

2019-06-08 17:10:47 -04:00
//
// NopSCADlib Copyright Chris Palmer 2018
// nop.head@gmail.com
// hydraraptor.blogspot.com
//
// This file is part of NopSCADlib.
//
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
// GNU General Public License as published by the Free Software Foundation, either version 3 of
// the License, or (at your option) any later version.
//
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
// See the GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License along with NopSCADlib.
// If not, see <https://www.gnu.org/licenses/>.
//
//
// This file included directly or indirectly in every scad file.
//
// This scheme allows the following:
// bom defaults to 0
// Setting $bom on the command line or in the main file before including lib.scad overrides it everywhere.
// Setting $bom after including lib overrides bom in the libs but not in the local file.
// Setting $_bom in the local file overrides it in the local file but not in the libs.
//
//function is_undef(x) = x == undef;
$_bom = is_undef($bom) ? 0 : $bom; // 0 no bom, 1 assemblies and stls, 2 vitamins as well
$exploded = is_undef($explode) ? 0 : $explode; // 1 for exploded view
layer_height = is_undef($layer_height) ? 0.25 : $layer_height; // layer heigth when printing
extrusion_width = is_undef($extrusion_width) ? 0.5 : $extrusion_width; // filament width when printing
nozzle = is_undef($nozzle) ? 0.45 : $nozzle; // 3D printer nozzle
cnc_bit_r = is_undef($cnc_bit_r) ? 1.2 : $cnc_bit_r; // miniumum tool radius when milling 2D objects
pp1_colour = is_undef($pp1_colour) ? "lime" : $pp1_colour; // printed part colour 1
pp2_colour = is_undef($pp2_colour) ? "red" : $pp2_colour; // printed part colour 2
pp3_colour = is_undef($pp3_colour) ? "blue" : $pp3_colour; // printed part colour 3
pp4_colour = is_undef($pp4_colour) ? "darkorange" : $pp4_colour;// printed part colour 4
show_rays = is_undef($show_rays) ? false : $show_rays; // show camera sight lines and light direction
2020-01-10 05:26:12 -05:00
show_threads = is_undef($show_threads) ? false : $show_threads; // show screw threads
2019-06-08 17:10:47 -04:00
// Minimum wall is about two filaments wide but we extrude it closer to get better bonding
squeezed_wall = $preview ? 2 * extrusion_width - layer_height * (1 - PI / 4)
: extrusion_width - layer_height / 2 + nozzle / 2 + extrusion_width / 2;
inf = 1e10; // very big
eps = 1/128; // small fudge factor to stop CSG barfing on coincident faces.
$fa = 6;
$fs = extrusion_width / 2;
function round_to_layer(z) = ceil(z / layer_height) * layer_height;
// Some additional named colors
grey20 = [0.2, 0.2, 0.2];
grey30 = [0.3, 0.3, 0.3];
grey40 = [0.4, 0.4, 0.4];
grey50 = [0.5, 0.5, 0.5];
grey60 = [0.6, 0.6, 0.6];
grey70 = [0.7, 0.7, 0.7];
grey80 = [0.8, 0.8, 0.8];
grey90 = [0.9, 0.9, 0.9];
2020-01-10 05:26:12 -05:00
brass = [255/255, 215/255, 0/255];
silver = [0.75, 0.75, 0.75];
2019-06-08 17:10:47 -04:00
/*
* Enums
*/
//
// Screws
//
hs_cap = 0;
hs_pan = 1;
hs_cs = 2; // counter sunk
hs_hex = 3;
hs_grub = 4; // pulley set screw
hs_cs_cap = 5;
hs_dome = 6;
//
// Hot end descriptions
//
jhead = 1;
e3d = 2;
//
// Face enumeration
//
f_bottom = 0;
f_top = 1;
f_left = 2;
f_right = 3;
f_front = 4;
f_back = 5;